3/8 Brass solenoid valve 0-8.5 Bar 2/2 N/Closed with Timer

Brand: Shako Co Ltd

Model: PU22003-SVT

Width 48.00
Height 101.00
Length 66.50

£98.75 £174.52
Price Ex Vat: £82.29

19 in stock


Brass 2/2 way normally closed solenoid valve complete with cycle timer Shako PU220A-03

Genuine Shako Solenoid Valve
Function: 2/2 way normally closed
Operation: assisted lift (zero rated)
Port: 3/8 BSP
Pressure: 0 to 8.5 Bar
Vacuum: 80% vacuum -0.8 Bar Max
Orifice: 13.0mm
Kv flow factor: 35 L/min based on water with 1 Bar pressure drop
Seals: NBR
Media: air, water, vacuum, oil and other fluids under 50 CST and gases compatible with materials of construction.
Media temperature: -15°C to +80°C
Coil: 15 Watt Shako / Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A
Protection: IP65 with connector (Included)
Voltage: 230vAC (+/- 10%).
Other voltages available 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 220vAC, 230vAC, 240vAC or 380vAC 50/60hz.

Digital Timer:
Solenoid valve Digital timer solid state and fully programmable SVTD
Voltage: 110-240 volt AC.
Time sequence: Any time sequence between 1 second and 59 hours 59 min 59 seconds.
Can be set Power ON then Power OFF or Power OFF then Power ON.
Fits ISO DIN43650A between solenoid coil and connector.
Switch capacity: 2 Amps Maximum
Protection: IP65 EN60529 with connector
Approvals: CE
Features: Flame retardant plastic, highly durable microcomputer, high precision, LED time display and power ON display.
Switch between ON then OFF or OFF then ON - Press Mode button. (from new is ON then OFF)

Time adjustment:
Press Mode - Press Enter
Press add to increase 1st digit hours, press Enter again to change 2nd digit hours, press enter and repeat for 2 digit minutes and again for seconds.
Press enter to set TIME OFF - repeat as above.
Press Mode when finished.

Analogue Timer: (Original fitment)
Repeat cycle solid state timer for solenoid valve SVT22
Mounting: Din43650A square fits directly between solenoid coil and connector
Voltage: 24 to 240 volt AC or DC
Includes: LED phase light, manual over ride touch switch, flat gasket and DIN connector screws standard and extra long.
Current consumption: 4mAmp Max
Temperature: -10°C to +60°C
Protection: IP65 NEMA IV with connector
Approvals: CE
Switch capacity: 1 Amp Maximum
Inrush current: 10 Amps for 10 milliseconds
Switch holding voltage: 400 Volts Max
Duty cycles: 100%
Switch life: 300,000,000 cycles
Input / Output: DIN43650A ISO4400 (Square)
Timing temp coefficient: +/- 0.005% per degree Centigrade
Scale accuracy: +/- 10%
Printed circuit board: UL 94V0

Add a review of this product