1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

Brand: Shako Co Ltd

Model: PU320

Dimensions
Width 23.00
Height 83.00
Length 33.00

£35.90 £44.52
Price Ex Vat: £29.92

436 in stock

Description

1/8 1/4 inch 3 way solenoid valve Shako PU320
Function: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)
Operation: direct acting
Port: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)
Option: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)
Pressure: 0 to 8 Bar
Body: Anodised aluminium
Internals: stainless steel and Brass
Orifice: 1.4mm
Kv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.
Seals: NBR standard, option FKM or EPDM
Media: compressed air, vacuum and inert gases compatible with materials of construction.
Coil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.

The PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels.
If you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

User Reviews

Geof - Talbot Matra on Mar 2, 2022

Dear Mike, Have attached a few pictures of your solenoid valve(s) which are now installed on my Matra Murena. The first picture is of the original set-up, with the white plastic valve. The black "thing" in the second photo is the bracket that I made to attach your valves to the inner wing panel, using the original mounting holes. The last two pictures show your valves in situ, connected and fully operational. As you can see, I have played about with the position of the ports on the two valves to fit them as fairly neatly as I could into the space available and to connect directly to the original pneumatic pipes. The two pipes from the headlight pod operating servo come up through the bottom of the inner wing and into the ports at the bottom of the solenoid valves. The vacuum from the engine inlet manifold is taken from the top, through your Y connector. I have sourced a few additional connectors to help with the installation, which I am sure could be further improved by someone who knew what they were doing! The installation has not required ANY irrevocable modifications to either the car or to the original headlight operating system components. All the original pneumatic pipework is still intact, as are the electrics. It would take less than 5 minutes to swop from the original valve to the new system and vice versa, should you wish to do so. The original solenoid valve was "protected" by a simple moulded black plastic cover. Amazingly, with a little bit of ingenuity and some small brackets (again using the original mounting holes), it should be possible to refit the original cover. That is my next task..... I have forwarded the details and photos to Matramagic, the UK spares specialist. Thankyou again for your help with this development. It certainly wouldn't have been possible without your knowledge, experience and brilliant service. Best regards, Geoff **************************************************** Sent: 04 March 2022 13:01 To: ****@solenoid-valves.com> Subject: Result! Dear Mike, Thankyou very much your email, with your suggestion for further improvements. It was very kind to offer yet more components, but I managed to source an 8mm to 6mm T connector on the internet - although it's not as nice as yours.... I couldn't agree more, this sort of development work is good fun, but I think we have probably both had enough of it now! As you can you from the latest set of photos; with your suggestion we have been able to take out TWO more fittings by swapping the Y connector for a T connector. In many respects, we have paired it back to something pretty close to your initial set-up, shown in your first photo? We have just shuffled the solenoid valves around, moved a port and changed a couple of fittings. Easy when you know how? Sadly, your lovely components are now protected behind the original plastic cover, but it is very tempting to make a new cover from Perspex? I think we can now both bask in glory, with a job well done. Thankyou again for all your help and encouragement. I have thoroughly enjoyed the challenge and have learnt lots about solenoid valves. Have a great weekend. Best regards, Geoff

Geof - Talbot Matra on Feb 24, 2022

WOW! Well done - that's bloody marvellous. I wasn't expecting a delivery from DPD, so it was quite a surprise to receive your parcel this morning. Thankyou for the clear instructions and your brilliant development work. I have "lashed-up" your control kit and I am delighted to tell you that it works perfectly. That is wonderful news. I certainly wouldn't have been able to work out how to do it, so I am very impressed with your expertise. As you say in your instructions, I will need to play about with the pipework layout and the electrical connections to fit everything into the space. The original white valve had a plastic protective cover, but I doubt that it will be large enough to house your control unit. However, it is no big deal as the unit is mounted under the bonnet, where there is plenty of space (the engine is behind the seats....), so it will probably just require a slightly larger cover? When I have completed the installation, I promise to send you some photos. I have already been in touch with Will Falconer at Matramagic, the UK Matra spares specialist, to give him the good news. He doesn't live too far from you, at Wrington, near Bristol! I have dealt with him for almost 30 years and he is a very pleasant and straightforward chap. He is well known to Matra owners and supplies Matra spares all over the world. As I mentioned, about 10,000 Talbot-Matra Murenas were made between 1980 and 1984 and the survival rate is unusually high as the chassis are hot-dipped galvanised and the body is polyester. In addition, the same white plastic valve was fitted to the preceding model, which was called the Bagheera - although far fewer of these survive. Once I have completed the "development work" , I will pass all the details to Will Falconer. Hopefully you will then start to see some reward for all the help that you have provided? You have obviously incurred some extra expense (the Y connector and the DPD delivery), so if you could calculate the amount that I owe, please, and I will phone later with my debit card details? Thankyou again for your assistance and support. Best regards, Geoff

Sabrina Seven on Jun 1, 2020

Item as described fast delivery many thanks

Saliveros on May 30, 2018

Excellent work, thanks for building the manifold for me, actually looks better than the picture.

S.Booth on Feb 24, 2016

Thank you for your help and support, I was really confused before I called. Valve arrived next day and cylinders back up and working again. xx

Add a review of this product