Electrical Connector 2P+E Form A Bridge Rectifier Red LED + VDR PG9 IP65 24v 110v 230v

Brand: Nass Magnet GmbH

Model: DIN2R-LED

Width 28.00
Height 31.00
Length 28.00

£10.25 £13.97
Price Ex Vat: £8.54

138 in stock


EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with full bridge rectifier, varistor + LED pins 18mm
Connection: DIN ISO4400 Form A DIN 43650A 28mm square
Voltage: 12, 24, 48, 120 or 230 volt
Current: 1 Amp maximum
Design: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover
Circuit: Full bridge rectifier (Converts AC 50/60Hz to DC) RED LED and VDR varistor with bipolar circuit protection. Option Yellow or Green LED
Drop off delay: Max 3mSec
Power consumption: 5mAmp Maximum
Resistance: 4 mOhm maximum.
Conduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed
Seals: NBR LABS-free 6 Grommet, gasket and cover gasket.
Max Wire Connection with clamping contact Wire 0.5 to 1.5mm, with wire protecting plate.
Position: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),
Central fixing screw: steel 4.8 zinc plated
Contacts: CuZn, Sn/Cu plated
Temperature: -25°C to +125°C
Circuit 09

2022 all contacts in the terminal block will have screws and PCB adjusted to the new terminal block.
24v 611-201-0308
230v 611-201-0309

In order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

Add a review of this product