Nass Magnet system 8 armatures and spares

Brand: Nass Magnet GmbH

Model: 22001nitrile

Dimensions
Width 9.00
Height 9.00
Length 40.50

£6.85 £10.24
Price Ex Vat: £5.71

129 in stock

Description

Nass Magnet system 8 2/2 way normally closed armature assembly with flange fitting with Brass or optional Stainless steel tube. Ambient temp -10C to +50C fitted with NBR seals suitable for compressed air, inert non aggressive gases and liquid media (optional EPDM and FKM sealing). Fits Shako PU220AR 1/8 and 1/4" brass solenoid valve.

Equivalent To

Nass magnet part numbers
2/2 way normally closed brass tube 108-010-0006
2/2 way normally closed stainless tube 108-010-0088

We can also offer 108-010-0081 3/2 way NC, 108-010-0084 3/2 way NC, 108-010-0100 3/2 way NC, 108-010-0026 3/2 way NC, 108-010-0007 3/2 way NC, 108-010-0010 3/2, way NC, 108-010-0006 2/2 way NC, 108-010-0088 2/2 way NC, 108-010-0009 3/2 way NC, 108-010-0049 3/2 way NC, 108-010-0172 3/2 way NO, 108-010-0001 3/2 way NC, 108-010-0060 3/2 way NC, 108-010-0003 3/2 way NC, 108-010-0066 3/2 way NC.

Other system 8 spares available include, (typically limited to minimum pack quantity 100 pieces)
Knurled nut, M 8 x 0,75 mm, Part No 108-080-0024, Explanation: tightening torque max. 1,2 Nm, use with spring washer 108-080-0022
Spring washer, Part No 108-080-0022, to use with knurled nut 108-080-0024
Knurled nut, M 8 x 0,75 mm, Part No 108-080-0025, tightening torque max. 0,5 Nm
Exhaust protector, M 8 x 0,75 mm Part No 108-080-0020, tightening torque max. 0,5 Nm
Mounting plate, Part No 108-702-0011, for armature assembly Flange only
O’ring FPM, 2,5 x 1,5 mm, Part No 900-841-0065, to use for valve systems KR and GKR
O’ring FPM, 11,5 x 1,5 mm, Part No 900-841-0077, to use for valve system KR
Gasket FPM, Part No 108-005-0024, touse for valve system GKR
O’ring FPM, 3,5 x 1,5 mm, Part No 900-841-0068, to use only for valve system FL
O’ring FPM, 8,0 x 1,0 mm, Part No 900-841-0074, to obtain IP 67, for one valve system two O’rings are required
O’ring FPM, 14,0 x 1,0 mm, Part No 900-841-0082, to obtain IP 67; for one valve system one O’ring is required
Cheese-head screw, M 3 x 18 mm, Part No 900-822-0037, slotted and with cross recess, tightening torque max. 0,5 Nm; for valve system KR only
Clamping cap, Part No 108-715-0009, push and turn actuation, clip-on type, for bistable manual override; for valve system CNOMO only
Push cap, Part No 108-715-0010, push and turn actuation, clip-on type, for monostable manual override; for valve system CNOMO only
Valve seat, orifice size 0,8mm, Part No 108-034-0005
Valve seat, orifice size 1,0mm, Part No 108-034-0003
Valve seat, orifice size 1.3mm, Part No 108-034-0004
Valve seat, orifice size 1.5mm, Part No 108-034-0001
Valve seat, orifice size 1.7mm, Part No 108-034-0002
Valve seat, orifice size 2.0mm, Part No 108-034-0007