Water Leak Detection System 240vAC

Brand: Connexion

Model: WLDS1V

Width 149.00
Height 88.00
Length 22.00

£338.40 £681.60
Price Ex Vat: £282.00

24 in stock


The WLDS1V mains powered 240v system has been designed to detection water leaks in small areas such as tea points, vending machines, basements and critical areas of the house and if required can stop the leak by closing a water valve.

A valve shutdown override facility is provided to allow reinstatement of the water after a leak whilst waiting for the detection cable to dry out. (Press alarm button for 7-8 seconds). If used, this override facility will automatically be cancelled when the alarm unit returns back to normal operation.
A normally open volt free contact has been provided for onward signalling to a BMS or existing alarm system.

In normal mode with no alarms or faults, the audible warning device will be OFF, and green lamp will be ON.

When the detection cable comes into contact with water anywhere along its length, the audible warning device will start, the BMS alarm relay will close and the lamp will start flashing between green and red. To stop the audible warning press the “Mute Alarm” button. On muting, the lamp will stop flashing and remain permanently red, indicating an acknowledged alarm. The system will remain in this state until the water is removed from the cable, when the lamp will turn green and BMS alarm relay turn OFF.

Fits into a standard deep double gang electrical socket back box

230VAC 50/60Hz operation

Audible warning device with “Mute” push button to silence the alarm

Flashing Red / Green Alarm lamp that changes to a steady Red when the alarm is muted

Green Power ON lamp

Volt free contact for onward alarm signalling to a BMS
Water shutoff valve control to stop the leak when an alarm is raised.

Water valve shutoff override facility allowing the water to be turned on when alarm is still active. (Press alarm button 7-8 seconds)

Alarms latched until Mute operated to give indication of transient water leaks

A Bi-directional DC signal in the sensors to stop electrolyses and polarisation

Sensitivity adjustment allowing it to be set for high to low sensitivity

Any double blanking plate can be used allowing the unit to match the surrounding décor

Accessories: (see related items)
Ball Valve 2 way normally closed 230vAC WRAS certified ABVM sizes 1/2, 3/4, 1, 11/4, 11/2 or 2" BSP Thread.

Add a review of this product