1 Stainless pressure limiting valve 3-200Bar Manual/Solenoid
£908.89
£1,761.58 incl. VATDescription
Manual stepless pressure regulation with air pilot and solenoid valve ON/OFF control, 90° type model 785-P
The valves work pressure balanced, and they are inserted in bypass. The media pressure is several times higher than the external pilot control pressure.
Connection: G1 (BSP)
Pressure range: 12 to 160 Bar, 10 to 120 Bar, 5 to 64 Bar, 3 to 40 Bar, 10 to 200 Bar, 5 to 140 Bar or 3 to 80 Bar according to orifice and actuator.
Media: Liquid / fluid (contamination 50 micron maximum)
Orifice: 10mm, 12mm, 15mm or 20mm
Kv flow factor: 3, 6, 8.3 or 14.1 M³/hr according to orifice
Body: AISI303 stainless
Seal: FKM
Temperature media: 0 to +60°C
Temperature ambient: 0 to +50°C
Electrical connection: DIN43650B industrial form
Nominal voltage: 24vDC or 230vAC
Voltage tolerance: +/- 10% according to VDE 0580
Power consumption: 24vDC 6 Watts, 230vAC 9.2VA
Protection: IP65 with connector (Included)
Duty factor: 100% ED
Mounting: Manometer preferred upright
Control air 8 Bar max filtered to 40 microns or better
Piping:
Following flow-calming sections in terms of straight conduits are at least to observe:
Before the valve (P-side) a length of three times the internal diameter.
Behind the valve (T-side) a length of five times the internal diameter.
At T-side must be a free discharge of the medium. No dynamic pressure and a minimal flow resistance must be ensured all the time.
Technical Specification
Brand: RSG regel-und steuergeräte gmbh
Model: 785-P
Width: 60.00 mm
Height: 143.00 mm
Depth: 169.00 mm
Weight: 2.00 kg
Body Material: Stainless Steel
Voltage: 230VAC, 24vDC
Port Size: 1 thread
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar, 120 Bar, 130 Bar, 135 Bar, 140 Bar, 150 Bar, 160 Bar, 200 Bar
Seals: FKM (Viton)
Approvals: IP65
Media: Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Oils + Fuels 50cSt Max
Options required: Manual Control, Outlet - right angle
Orifice: 10mm, 12mm, 15mm, 20mm
Valve / Product Type: Manual Control, Pressure Relief, Solenoid