DN15-50 Flanged cast iron solenoid valve 0-25 Bar 2/2 Normally Closed (860AG1) 15-50mm
£1,121.57
£1,383.46 incl. VATDescription
Flanged Cast Iron solenoid valve 860CI (860AG1)
Function: 2/2 way normally closed
Operation: Direct Acting (forced pilot)
Port Sizes: DN15, DN20, DN25, DN32, DN40 and DN50 PN16 flange, option PN40
Body: Cast Iron GG25
Internals: stainless steel
Seals: NBR, EPDM or FKM, option PTFE
Temperature: +130°C Max
Opening time: 1 second Max
Closing time: 0.5 Seconds Max
Media: air, water, oil and vacuum, other fluids under 50CST and gases compatible with materials of construction.
Pressure: 0 to 25 Bar according to orifice and coil
Orifice: 15mm, 20mm, 25mm, 32mm, 40mm or 50mm according to port size
Kv flow factor: 117 to 633 L/min according to orifice size based on water with 1 Bar pressure difference.
Coil 1: 30 Watt 60mm diameter 100% duty rated IP65 with connector 100% duty rated.
Coil 2: 60 Watt 70mm diameter 100% duty rated IP65 with connector 100% duty rated.
Options: ATEX EExemIIT4 2G & 2D IP65 T130°C, Open and Closed Position switches and manual Over Ride.
Technical Specification
Brand: RSG regel-und steuergeräte gmbh
Model: 860CI
Width: 95.00 mm
Height: 165.00 mm
Depth: 130.00 mm
Weight: 5.35 kg
Valve / Product Type: Solenoid
Body Material: Cast Iron
Voltage: 110vAC, 110vDC, 200vDC, 230VAC, 24vAC, 24vDC
Port Size: 1/2 inch Flange DN15, 3/4 Flange DN20, 1 inch Flange DN25, 11/4 inch Flange DN32, 11/2 inch Flange DN40, 2 inch Flange DN50
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar
Seals: EPDM, NBR, PTFE (Teflon), FKM (Viton)
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (Low), Water
Options required: Anti Water Hammer, Position Feedback Closed, Position Feedback Open+Closed
Orifice: 15mm, 20mm, 25mm, 32mm, 40mm, 50mm