1/4 Brass ball valve 3 way motorised Open/Close Failsafe
£75.85
£100.75 incl. VATDescription
1/4 inch 3 way Motor Actuated Ball Valve Mini series ABVM02B3.
Actuator:
Cycle life: 100,000+ open/close
Power: 5 Watts Max when moving (Back EMF 3 to 5 Volts over nominal).
Power supply: 500mA Min recommended.
Open or close time: 5 seconds
Protection: IP67
Temperature: -15°C to +50°C ambient.
Voltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology
Includes: visual position indication.
Ball Valve:
1/4 BSP thread
Bore: 6.0mm
Body: Brass
Pressure: 0 to 10 Bar
Seals: PTFE + FKM
Temperature: -15°C to +100°C.
Media: air, water, oil and fluids and gases compatible with Brass FKM and PTFE.
Options to choose.
1. Valve type (Flow direction):
L Port (centre to left or right port)
T Port 4 options for flow direction TA, TB, TD or TE
2. Function:
Power Open/Close, Power to move = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire. Power to GREEN valve moves or power off valve returns. (ABVM02B3/2 and ABVM02B/9)
Failsafe Return = Power ON will move - Power OFF will automatically RETURN with reserve power. (ABVM02B3/9AR + ABVM02B3/2AR)
Failsafe: Requires minimum 30 second power ON for recharging capacitors.
3. Control voltage 9 to 24v AC/DC (9) or 110 to 240vAC (2)
Option ABVM Weather Cover (recommended for use outdoors or very wet environments).
Other Special options upon request.
Manual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.
Available 9 to 24 volt only.
E2 Position Switches = Position OPEN and CLOSED volt free feed back (no voltage supplied from actuator).
Rating 0 to 36vDC, 0.4 Amp Max.
Technical Specifications
Speed:
9-24 volt: Open 4 second / close 4 seconds
110-240 volt: Open 4 seconds / Close 6 seconds.
Start Power
9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.
Moving Power:
9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.)
110-240 volt: 2 to 5 Watts, 50 to 100mA.
Maximum Voltage:
Actuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.
Actuators with manual override can operate from 9 to 35 volts AC/DC.
Technical Specification
Brand: Connexion
Model: ABVM02B3
Width: 70.00 mm
Height: 89.00 mm
Depth: 55.00 mm
Weight: 0.64 kg
Valve / Product Type: Ball, Motor Actuated
Body Material: Brass
Voltage: 12vDC, 12vAC, 24vDC, 24vAC, 110vAC, 230VAC
Port Size: 1/4 thread
Function: 3 way T Port, 3 way L Port
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: FKM (Viton)
Approvals: IP67
Options required: Anti Water Hammer, Bi-Directional Flow, Manual Override, Outlet - right angle, Position Feedback Closed, Position Feedback Open+Closed, Position indication Visual
Orifice: 6.0mm
Media: Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Water