1/2 Stainless ball valve motorised Open/Close or Failsafe
£83.42
£111.23 incl. VATDescription
1/2 inch Motor Actuated Ball Valve Mini series with FKM seals ABVM04SV ®.
Motor Actuator:
Open/Close: 4 to 6 seconds.
Includes: visual position indication.
Temperature (ambient): -15°C to +50°C.
Cycle life: 100,000+ open/close, 100% rated.
Power Consumption: 1 to 5 watts when moving.
Control options: Failsafe return or Power Open/Close.
Power supply: 9-24v 2 amp, 110-240v 500mA recommended.
Voltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.
Ball Valve:
Bore: 15.0mm
Pressure: 0 to 10 Bar
Body: 304 stainless steel
Port 1/2 BSP, optional NPT thread
Seals: PTFE + FKM.
Temperature (media): -15°C to +100°C.
Media: Fluid, oil + gases suitable with 304 stainless steel, FKM + PTFE.
Options to choose.
1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM04SV/9AR + ABVM04SV/2AR)
2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM04SV/9AR-NO + ABVM04SV/2AR-NO)
Failsafe actuators require minimum 30 second power ON for recharging.
3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.
Power to GREEN valve opens or power off valve closes. (ABVM04SV/2 and ABVM04SV/9)
4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.
Other options.
Manual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.
Available low voltage only. (ABVM04SV/9AR-MO, ABVM04SV/9AR-NO-MO, ABVM04SV/9-MO)
ABVM Weather Cover (recommended for use outdoors or wet environments).
E2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.
Volt free feed back (no voltage supplied from actuator).
Switch rating 0 to 36vDC 0.4 Amp Max. (ABVM04SV/9AR-E2, ABVM04SV/2AR-E2, ABVM04SV/9-E2, ABVM04SV/2-E2)
Technical Specifications
Speed:
9-24 volt: Open 4 second / close 4 seconds
110-240 volt: Open 4 seconds / Close 6 seconds.
Start Power
9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.
Moving Power:
9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.)
110-240 volt: 2 to 5 Watts, 50 to 100mA.
Maximum Voltage:
Actuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.
Actuators with manual override can operate from 9 to 35 volts AC/DC.
Technical Specification
Brand: Connexion
Model: ABVM04SV
Width: 65.00 mm
Height: 100.00 mm
Depth: 63.00 mm
Weight: 0.50 kg
Valve / Product Type: Ball, Motor Actuated
Body Material: Stainless Steel
Voltage: 110vAC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 1/2 thread
Function: 2/2 Normally Closed, 2/2 Normally Open, Power Open/Power Close
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: FKM (Viton)
Approvals: IP67
Options required: Anti Water Hammer, Bi-Directional Flow, Manual Override, Position Feedback Closed, Position Feedback Open+Closed, Position indication Visual
Orifice: 15mm
Media: Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Fluid Thick 51>500cSt, Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low)