1/2 DN15 to 2 inch DN50 UPVC ball valve FKM or EPDM seals 4-20mA, 0-10V or 0-5v modulating (ABVP/9M)
£196.90
£281.29 incl. VATDescription
1/2 to 2 inch motor actuated UPVC ball valve ABVP-9M.
Actuator:
Control option: 4-20mA, 0-5 volt or 0-10 volt modulating.
Voltage: 12v-24vDC with multi voltage technology.
Torque: 15NM (20NM Break)
Cycle life: 70,000 open/close
Power: 10 Watts 1 Amp Max
Fully Open to fully closed time: 12 seconds
Accuracy: Minimum 1.2° opening, 75 steps fully closed to fully open.
Protection: IP67
Mounting: ISO5211 F03 + F05
Temperature: -15°C to +60°C ambient
Includes:
Visual position indication
Manual Override (with Allen key provided)
Position feed back
Actuator status output
Ball valve:
Double Union Ended 1/2, 3/4, 1, 11/4, 11/2 or 2\ BSP thread, option NPT or metric solvent ends.
Bore: Full bore 15 to 50mm according to port size
Body: UPVC
Pressure: 0 to 10 Bar
Temperature rating +2°C to +90°C Max
Seals: PTFE with EPDM, option PTFE with FKM
Media: air, water, oil, fluids and gases compatible with materials of construction.
Control options to choose:
a. 4-20mA modulating control.
b. 0-5 volt modulating control
c. 0-10 volt modulating control
Connect Power +ve Red & -ve Black (12 to 24vDC)
Status signal Yellow, output 3.3v=OK, Output 0v=Fault.
Input signal 4-20mA (Option 0-5 or 0-10v), Green +ve
Position feed back output signal 4-20mA, White +ve
Common feedback -ve Blue
Technical Specification
Brand: Connexion
Model: ABVP/M9
Width: 75.70 mm
Height: 150.00 mm
Depth: 107.00 mm
Weight: 1.50 kg
Valve / Product Type: Ball, Flow rate control, Motor Actuated
Body Material: UPVC
Voltage: 12vDC, 24vDC
Function: Proportional / Modulating
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM, FKM (Viton)
Approvals: IP67
Media: Fluid (Stong Acid/Alkali), Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Gases (Strong Acid/Alkali), Oils + Fuels 50cSt Max, Fluid Thick 51>500cSt, Vacuum (Low), Water, Water (RO/Pure/Demin)
Orifice: 15mm, 20mm, 25mm, 32mm, 40mm, 50mm
Options required: Anti Water Hammer, Bi-Directional Flow, Flow Control, Manual Override, Mounting Holes, Position Feedback Closed, Position Feedback Open+Closed, Position indication Visual
Port Size: 1/2 thread, 3/4 thread, 20mm, 1 thread, 25mm, 11/4 thread, 32mm, 11/2 thread, 40mm, 2 thread, 50mm, 63mm