1/2 Brass solenoid valve 0-7 Bar 2/2 N/Closed (AD12) 6+8mm
£72.76
£99.22 incl. VATDescription
1/2 inch Brass solenoid valve CS Fluid Power AD12A + AD12B.
Function: 2/2 way normally closed
Operation: direct acting
Port: 1/2 BSPT, option NPT thread
Pressure: 0 to 7 Bar according to coil, voltage and orifice
Vacuum: 0 to -101kPa (relative 757.56 mmHg) or 99.67% vacuum
Body: Brass
Internals: stainless steel
Orifice: 6mm or 8mm.
Flow: 11.3 or 13.9 L/Min according to orifice, based on water with 1 Bar pressure drop.
Seals: FKM (Optional EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR)
Media: air, water, light oils, high vacuum (-101kPa) and most other fluids under 50CST and gases compatible with materials of construction.
Coil: WPG2 18 Watt UL, CSA, IP66 CE approved Class H 100% duty rated DIN43650A
Protection: IP65 with LED connector (Included)
Coil Option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 (70% of DC pressure).
Voltage: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.
Other options: Manual Over Ride.
Coil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.
The AD12 series is a pure direct acting valve that is ideal for vacuum, low to medium pressures as an ideal general purpose solenoid valve.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: AD12
Width: 27.00 mm
Height: 91.00 mm
Depth: 55.00 mm
Weight: 0.78 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 12vDC, 24vDC, 24vAC, 48vAC, 48vDC, 110vAC, 230VAC
Port Size: 1/2 thread
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST
Approvals: IP54, IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (High), Vacuum (Low), Vacuum (Medium), Water
Options required: Degreased, Manual Override, Mounting Holes, Shading Ring - without
Orifice: 6.0mm, 8.0mm