1/8 Stainless steel solenoid valve 0-42 Bar 2/2 Latching
£128.69
£158.74 incl. VATDescription
1/8 inch stainless steel latching / bi-stable solenoid valve CS Fluid Power LADS6000.
Function: 2/2 way latching bistable
Operation: direct acting
Body: 316 stainless steel
Internals: Stainless steel
Shading ring: without
Port: 1/8 BSP, option NPT thread.
Orifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm
Kv flow factor: 1.0 to 9.2 Min according to orifice, based on water with 1 Bar pressure difference.
Pressure: vacuum 10–6 Torr to 42 Bar (depending on coil power and orifice size)
Seals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.
Media: air, water, light oil, vacuum 10-6 Torr and most slightly aggressive fluids under 50CST and gases compatible with materials of construction.
Coil: WPG1 12 Watt IP68, CE, UL, CSA approved DIN43650A Class H 100% duty rated, fitted with IP67 LED connector, so overall protection is IP67.
Coil: WPG2 18 Watt IP68, CE, UL, CSA approved DIN43650A Class H 100% duty rated, fitted with IP67 LED connector, so overall protection is IP67.
Voltages: 12vDC or 24vDC
LADS6000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve, a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again, swap the live and neutral wires back to original position and repeat the process.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: LADS6000
Width: 19.00 mm
Height: 85.00 mm
Depth: 41.00 mm
Weight: 0.51 kg
Valve / Product Type: Solenoid Valve
Body Material: Stainless Steel
Voltage: 12vDC, 24vDC
Port Size: 1/8 thread
Function: 2/2 Latching
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Steam, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)
Options required: Degreased, Manifold, Manual Override, Mounting Holes, Shading Ring - without
Orifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm
Approvals: IP65, IP66, IP67, CSA, UL