3/8 - 2 inch Brass solenoid valve 0.5-40 Bar 2/2 N/Closed
£212.46
£318.68 incl. VATDescription
High pressure Brass solenoid valve CS Fluid Power SAH
Function: 2/2 way normally closed (Failsafe closed power to open)
Operation: pressure assisted (requires min 0.5 Bar pressure difference)
Port: 3/8, 1/2, 3/4, 1, 11/4, 11/2 and 2 BSP, option NPT Thread
Pressure: 0.5 to 40 Bar / 580 PSI
Body: Brass
Seals: PTFE
Piston: Stainless steel
Media: air, water, light oils and fluids under 50CST and gases compatible with materials of construction.
Orifice: 15mm, 20mm, 25mm, 35mm or 50mm (according to port size)
KV flow factor: 64 to 686.4 L/Min based on water with 1 Bar pressure drop (according to orifice)
Coil: WPG2 UL and CSA approved IP67 18 Watt (15.3VA to 18.7VA) 100% duty rated DIN43650A
Protection: IP65 with LED electrical connector (included)
Coil option: ATEX EExmIIT4 coil for hazardous area zones 21 and 22 (Max 20 Bar custom option 25 Bar).
Voltages: 12vDC, 24vDC, 48vDC or 12vAC, 24vAC, 48vAC, 110vAC, 220vAC, 240vAC or 380vAC 50/60Hz.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: SAH
Width: 48.00 mm
Height: 123.00 mm
Depth: 67.00 mm
Weight: 1.10 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Port Size: 1 thread, 1/2 thread, 11/2 thread, 11/4 thread, 2 thread, 3/4 thread, 3/8 thread
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 25 Bar, 30 Bar, 35 Bar, 40 Bar
Seals: PTFE (Teflon)
Approvals: ATEX Zone II GD, ATEX Exm, IP54, IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Water
Orifice: 15mm, 20mm, 25mm, 35mm, 50mm
Options required: Degreased, Shading Ring - Silver, Shading Ring - without