1 Stainless steel solenoid valve 0.5-15 Bar 2/2 Normally Closed (SPU225A-08) 25mm
£217.80
£275.26 incl. VATDescription
1 inch stainless steel solenoid valve Shako SPU225A-08 ®
Function: 2/2 way normally closed
Operation: pressure assisted, requires Min 0.5 Bar differential
Port: 1 BSPP, option NPT or Rc thread.
Pressure: 0.5 to 10 Bar differential, 15 Bar max working
Body: 316 stainless steel
Internals: stainless steel
Shading ring: Copper, option silver (AC or DC) or without ring ((DC only or AC with rectified DIN connector to DC)) for demin water, RO water, pure water and Adblue.
Orifice: 25.0mm
Kv flow factor: 165 L/min based on water with 1 Bar pressure drop
Sealing: Viton (FKM) standard optional EPDM, NBR or HNBR
Media: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.
Option: degreased, with all traces of oil and grease removed.
Temperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.
Coil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A
Protection: IP65 with connector (Included)
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.
Coil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.
SPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.
Degreasing available for oxygen use.
HS code 84818030
Technical Specification
Brand: Shako Co Ltd
Model: SPU22508
Width: 70.00 mm
Height: 126.50 mm
Depth: 100.00 mm
Weight: 1.55 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 110vDC, 12vAC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Port Size: 1 thread
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM, HNBR, NBR, FKM (Viton)
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Water, Water (RO/Pure/Demin)
Options required: Degreased, Shading Ring - without, Shading Ring - Silver
Orifice: 25mm