DN100 PN16 Flange Gas solenoid valve EN161 200mBar N/Closed
£770.28
£1,904.62 incl. VATDescription
4 inch Gas Solenoid Valve EN161 Elektrogas VMR92
Function: 2/2 way normally closed
Operation: direct acting
Port: 4\ DN100 PN16 flange, (Option ANSI150Lb)
Pressure: 0 to 200 millibar, options 500 millibar or 6 Bar
Media: Air, Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)
Certified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357
Kvs flow factor: 148.0 m³/Hr, equipped with flow rate adjustment
Body: Aluminium
Seals: NBR based rubber certified for gas (EN549)
Open/close time: <1 second
Temperature: -15°C to +60°C
Mesh filter: 600 µm protects valve seat, disc and downstream components
Gauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.
Proof of closure: 1/8BSP port to accept PCS switch fitted as standard.
Voltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC on request
Coil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.
Electrical safety: Class I (EN 60335-1)
Coil: Insulation Class H 200°C, thermal resistance Class F 155°C
Voltage tolerance: -15% to +10%
Coil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X
Option: Proof of closure switch (P): Mechanical closed position electrical switch PCS9.
Valves are 100% tested by computerised testing and are fully warranted.
All components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability, sealing and corrosion resistance.
The VMR92 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.
VMR1930.1912 230vAC coil for VMR92
Technical Specification
Brand: Elektrogas
Model: VMR92
Width: 220.00 mm
Height: 492.00 mm
Depth: 350.00 mm
Weight: 36.00 kg
Valve / Product Type: Flow rate control, Solenoid
Body Material: Aluminium
Voltage: 110vAC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 4 inch Flange DN100
Function: 2/2 Normally Closed
Operation: Assisted Lift
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar
Seals: NBR, FKM (Viton)
Approvals: ATEX Zone II GD, IP54, IP65, EAC, EN161, FM, SIL3
Media: Air, Gases (Non Aggressive), Gases (Slight Acid/Alakli), Natural Gas
Options required: Position Feedback Closed
Reviews
★★★★★5.0 / 5 1 reviews
Phil L
★★★★★A++ recommended, easy to order, fast delivery, well packaged and well priced too with FREE delivery!!.
Reviewed on 07/08/2017