11/2-3 Air Filter Elements Dust Coalescing + Carbon

Description

Dust, Coalescing and activated filter elements for YD and BHL filter units.

Select filter size and type as below.

L145 for YD145 + BHL145 (7.2M³/Min)
L220 for YD220 + BHL220 (12M³/Min)
L330 for YD330 + BHL330 (16M³/Min)
L260 for YD260 (14M³/Min)
L360 for YD360 (19M³/Min)
L405 for YD405 (22M³/Min)
L430 for YD430 + BHL430 (28M³/Min)
L620 for YD620, BHL620 to BHL2200 (37.2M³/Min)

Quantity of Filter elements required for BHL series. (YD series only 1 element required)
BHL800 to BHL1200 require 2x L620 elements
BHL1400 require 3x L620 elements
BHL1600 require 4x L620 elements
BHL1800 require 5x L620 elements
BHL2200 require 8x L620 elements.

Filter Element Options:
PF - 5μ (Primary Filter) ISO12500-3 solid particles over 5μ, ISO12500-1 50% oil removal, residual 5mg/M³.
AO - 1μ Coalescing, ISO12500-3 solid particle removal 99.999+%, ISO12500-1 80+% oil removal, residual 0.6mg/M³ at 21C + 1ppm water.
AA - 0.01μ Coalescing, ISO12500-3 solid particle removal 99.999+%, ISO12500-1 oil removal 99.9+%, residual oil <0.01mg/M³ at 21C + 0.01ppm water.
ACS - Activated Carbon, ISO12500-3 particle removal 99.999+%, ISO12500-1 oil removal <0.004mg/M³ 21C + 0.003ppm water.

Manufactured to International Standards (ISO8753) ISO12500, ISO12500-1, ISO12500-2 + ISO12500-3.
ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance parameters are the air inlet oil content and the particle size distribution of the solid particles.
ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
ISO12500-2 specifies the test requirements of absorption filters for the removal performance of steam absorption.
ISO12500-3 specifies the requirements for removal of particulate matter from solid pollutants.

Supplied by professional manufacturers of compressed air separation, filtration and purification equipment since 1998.

Technical Specification