2/2 way normally closed valves require power to open. They are direct acting and will operated from vacuum up to their maximum working pressure available in Brass, Stainless and Plastic.

2/2 way normally closed valves require power to open. They are pressure assisted and require a minimum pressure difference between inlet and outlet port from 0.5 Bar (7psi) up to their maximum working pressure available in Brass, Stainless and Plastic

2/2 way normally open valves require power to close. They are direct acting and will operated from vacuum up to their maximum working pressure available in Brass, Stainless and Plastic.

2/2 way normally open valves require power to close. They are pressure assisted and require a minimum pressure difference between inlet and outlet port from 0.5 Bar (7psi) up to their maximum working pressure available in Brass, Stainless and Plastic

3/2 way solenoid valves for diverting flow including 3 way Normally Closed, Normally Open and Universal function available in Brass, Aluminium, Stainless steel and Plastic.

5 port 2 position single acting (mono stable) solenoid valve. Example: Power on cylinder fully extends, power off cylinder fully retracts (or visa versa).

5 port 2 position double acting (bi stable) Solenoid Valve. Example: Power to coil 1 Cylinder fully extends, power off cylinder stays put, power to coil 2 cylinder fully retracts.

5 port 3 position double acting (Bi stable) Solenoid Valve. Example: Power coil 1 cylinder extends, power off cyclinder stops even in mid position. Power to coil 2 cylinder retracts, power off cylinder stops even in mid position. An addition of speed controller into air line or exhaust port will slow cylinder speed.

Latching / bistable solenoid valves 6 volt, 12 volt or 24 volt DC. Require a short 20 millisecond power pulse to stay open then a reverse polarity (swap +ve and -ve supply) short electrical power pulse to stay closed. Reverse the polarity again and repeat the sequence.

Proportional valves controlled by 0-10 volt or 4-20mAmp signal