3/8-2 stainless steel solenoid valve 0-3.5 Bar 2/2 Latching 12/24vDC (LADS14-50) 15-50mm
£244.49
£301.58 incl. VATDescription
Stainless steel latching solenoid valve CS Fluid Power LADS14-50.
Function: 2/2 way latching bistable
Operation: direct acting
Body: 316 stainless steel
Internals: Stainless steel
Shading ring: without
Port: 3/8, 1/2, 3/4, 1, 11/4, 11/2 and 2 BSP, option NPT thread.
Orifice: 15mm, 20mm, 25mm, 35mm and 50mm (depending on port size)
Kv flow factor: 64.4 to 686.4 L/min accoring to
Pressure: full vacuum to 3.5 Bar (sizes 3/8 to 11/2)
Pressure: full vacuum to 2.5 Bar (size 2 inch)
Seals: NBR standard, option FKM, VST, EPDM, Silicone, Neoprene, Hypalon, ECO and HNBR.
Media: air, water, light oils, slightly aggressive media and fluids under 50CST and gases that are compatible with materials of construction.
Coil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Protection: IP65 with LED connector (included)
Voltages: 12vDC or 24vDC
LADS14, LADS15, LADS20, LADS25, LADS35, LADS40 and LADS50 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: LADS1450
Width: 52.00 mm
Height: 102.00 mm
Depth: 75.00 mm
Weight: 1.06 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 12vDC, 24vDC
Port Size: 1 thread, 1/2 thread, 11/2 thread, 11/4 thread, 2 thread, 3/4 thread, 3/8 thread
Function: 2/2 Latching
Operation: Assisted Lift
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, Silicone, FKM (Viton), VST
Approvals: IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Steam, Vacuum (Low), Water, Water (RO/Pure/Demin)
Options required: Degreased, Manual Override, Shading Ring - without
Orifice: 15mm, 20mm, 25mm, 35mm, 50mm