1/8, 1/4, 3/8, 1/2 ATEX Exd Stainless steel solenoid valve 0-225 Bar 2/2 Normally Closed (Rotex 20126, 20126V01) 0.8-5mm
£190.62
£358.12 incl. VATDescription
Rotex ATEX Ex d high pressure Solenoid valve with explosion proof protection and IP67 enclosure Rotex model 20126 and 20126V01.
Features: Bubble tight shut off, vibration resistance to 9G, high speed cycle 1000/min, life expectancy > 10 million cycles
Function: 2/2 way normally closed
Operation: Direct Acting
Port: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread
Pressure: 0 to 225 Bar according to orifice
Body: 316 stainless steel CF8, option Brass or Aluminium
Internals: stainless steel
Shading Ring, Copper, Option silver or without.
Seals: NBR, Viton, EPDM, PTFE / Viton and Hytrel.
Media: vacuum to 10-6 Torr, air, water, gases or fluids compatible with materials of construction.
Orifice: 0.8mm, 1.2mm, 1.6mm, 1.8mm, 2.2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm.
Kv flow factor: 0.5 to 7 L/min according to orifice based on water with 1 bar pressure drop.
Coil II 18mm 13 watt IP66/67 Class H with surge suppression, Ex d IIC T4-T5-T6.
Voltage: 12vDC, 24v AC/DC, 48v AC/DC, 110v AC/DC or 230v AC/DC (+/- 20%) (Except 12vDC, all other ATEX coils are rectified and accept AC 50/60Hz or DC input)
Enclosure: Aluminium or 316 stainless steel, M20x1.5mm or 1/2 NPT conduit entry Horizontal.
Power of Coil : 13 W
Insulation Class : Class H
Approval : CE - ATEX
Coil Certificate number: ATEX TI22ATEX 278X
Marking : Ex II 2GD
Ex db IIC T6/ T5 Gb
Ex tb IIIC T80°C/ T95°C Db, IP66/ IP67
-40 °C < Ta < 60 °C FOR T6
-40 °C < Ta < 70 °C FOR T5
Technical Specification
Brand: Rotex
Model: 20126
Width: 38.00 mm
Height: 87.00 mm
Depth: 38.00 mm
Weight: 1.00 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 110vDC, 12vAC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 1/2 thread, 1/4 thread, 1/8 thread, 3/8 thread
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar, 120 Bar, 130 Bar, 135 Bar, 140 Bar, 150 Bar, 160 Bar, 200 Bar, 225 Bar
Seals: NBR, PTFE (Teflon), FKM (Viton)
Approvals: ATEX Zone II GD, ATEX Exd, IP65, IP67, IP68, CUTR, GOST, Inmetro, SIL3
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Water, Water (RO/Pure/Demin)
Options required: Degreased, Manual Override, Mounting Holes, Shading Ring - Silver, Shading Ring - without
Orifice: 0.8mm, 1.2mm, 1.6mm, 1.8mm, 2.2mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm