3/8 Stainless steel solenoid valve 0-15 Bar 2/2 Normally Closed (ADS10) 4,6+8mm
£128.05
£174.62 incl. VATDescription
3/8 inch Stainless solenoid valve CS Fluid Power ADS10A, ADS10B, ADS10C.
Function: 2/2 way normally closed
Operation: direct acting
Port: 3/8 BSPT, option NPT thread
Body: 316 stainless steel
Internals: stainless steel
Pressure: 0 to 15 Bar according to coil, voltage and orifice
Vacuum: 0 to -101kPa (relative 757.56 mmHg) or 99.67% vacuum
Orifice: 4mm (ADS10A), 6mm (ADS10B) and 8mm (ADS10C).
Flow: 3.71 to 13.9 L/Min according to orifice, based on water with 1 Bar pressure drop.
Temperature: -10 to +180°C Max according to seal material
Sealing: FKM standard, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR
Media: air, water, light oils, vacuum and most other fluids under 50CST and gases compatible with materials of construction.
Coil: WPG2 18 Watt UL, CSA, IP67 CE approved Class H 100% duty rated DIN43650A
Protection: IP65 with LED connector (Included)
Coil Option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 (70% of DC pressure).
Coil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.
Voltage: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.
Other options: Manual Override, silver shading ring, degreased for oxygen use.
Technical Specification
Brand: CS Fluid Power
Model: ADS10
Width: 25.00 mm
Height: 90.00 mm
Depth: 50.00 mm
Weight: 0.73 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 3/8 thread
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST
Approvals: ATEX Zone II GD, ATEX Exm, IP54, IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Steam, Vacuum (High), Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)
Options required: Degreased, Manual Override, Mounting Holes, Shading Ring - Silver, Shading Ring - without
Orifice: 4.0mm, 6.0mm, 8.0mm