Coax solenoid valve 2/2 64 Bar Brass + Stainless 3/8-1 DN15

Description

Coaxial solenoid valve 2 way 0-64 Bar DN15 RSG 27115
Function: 2/2 way normally closed, option normally open
Operation: direct acting
Pressure: 0 to 64 Bar (0 to 16 Bar reverse flow)
Orifice: 15mm
Kv flow factor: 91 L/Min
Port sizes: 3/8, 1/2, 3/4 or 1 BSP, option NPT or flange
Body: Brass, option stainless steel 304 or 316L
Internals: stainless steel 316L

Media: Fluids under 500 CST and gases compatible with materials of construction.
Media temperature: -10°C to +100°C

Fluid Seals: FKM and PTFE, option NBR or EPDM.

Water Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C

Gaseous Seals: Fluoroloy®. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.

Increased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.

Voltages 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other custom voltages available upon request.
Coil: DIN43650A 100% duty rated IP65 with connector (Included)
Approvals: TÜV, DGVM

Options: 271A15 normally closed, 271B15 normally open, manual over ride, inductive open and/or closed position switches with LED + 2mtr cable, various DIN43650A connectors or aluminium terminal box, mounting brackets and modular sub base mounted systems.

The 24vDC valve can be fitted with DIN43650A PWM connector (Pulse Width Modulating) a power reduction technology that reduces the holding power by up to 80% for a Greener environmentally friendly low power; low heat emission and improved thermal stability.
Other PWM voltages available upon request.

Technical Specification