Coax solenoid valve 3/2 64 Bar Brass Stainless 1/4-3/4 DN10

Description

Coax solenoid valve 3 way 0-64 Bar DN10 RSG 37110
Function: 3/2 way normally closed, option normally open
Operation: direct acting
Pressure: 0 to 64 Bar (0 to 16 Bar reverse flow)
Orifice: 10mm
Kv flow factor: 51 L/Min
Port sizes: 1/4, 3/8, 1/2 or 3/4 BSP thread, option NPT or flange
Body Brass, option stainless steel 303 or 316L
Internals: stainless steel 316L

Media: Fluids under 500 CST and gases compatible with materials of construction.
Media temperature: -10°C to +100°C

Fluid Seals: FKM and PTFE, option NBR or EPDM.

Water Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C

Gaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.

Increased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.

Voltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other voltages available on request.
Coil: DIN43650A 100% duty rated IP65 with connector (Included)

Options: 371A10 normally closed, 371B10 normally open, manual override, open and/or closed volt free position feed back switches, various DIN43650A connectors or aluminium terminal box and mounting brackets.

The 24vDC valve can be fitted with PWM (Pulse Width Modulating) connector with power reduction technology that reduces the holding power by up to 80% for a Greener more environmental friendly low power; low heat emission with improved thermal stability.
PWM technology is available for other voltages upon request.

Technical Specification