3/4 Nylon solenoid valve 0.3-7 Bar 2/2 Normally Closed c/w Manual Override (GP20) 20mm
£67.14
£91.55 incl. VATDescription
3/4 inch Plastic Water Solenoid Valve GP20
Function: 2/2 way normally closed with manual override, flow regulator with anti water hammer design
Operation: pressure assisted (requires minimum 0.3 Bar pressure difference)
Port 3/4 BSP thread
Pressure: 0.3 to 7 Bar
Body: reinforced Nylon PA
Internals: Brass + stainless steel
Seals: NBR
Temperature: +5°C to +50°C
Media: water and other fluids under 50 CST or gases compatible with materials of construction.
Orifice: 20mm
Kv flow factor: 113 L/min based on water with 1 Bar pressure difference
Opening time: 50-250 milliseconds max
Closing time: 100-500 milliseconds max
Coil: 4.5 Watt DIN43650B IP65 100% continuously rated
Coil latching: 1.5 Watts DIN43650B IP65
Protection: IP65 with connector (Included)
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.
Coil option: 6.8 Watt higher power coil can be used with stronger armature spring for slightly contaminated media.
Voltages: 12vDC, 24vDC, 48vDC and 12vAC, 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz.
Technical Specification
Brand: AAA (Sunwell)
Model: GP20
Width: 81.00 mm
Height: 105.00 mm
Depth: 110.00 mm
Weight: 0.24 kg
Valve / Product Type: Flow rate control, Solenoid
Body Material: Nylon
Voltage: 110vAC, 110vDC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 3/4 thread
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar
Seals: NBR
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Water
Options required: Anti Water Hammer, Flow Control, Manual Override
Orifice: 20mm