3/8 to 2 Brass solenoid valve 0-3.5 Bar 2/2 Latching 12vDC or 24vDC (LAD14-50) 15-50mm
£134.54
£165.96 incl. VATDescription
Brass latching / bi-stable solenoid valve CS Fluid Power LAD14-50.
Function: 2/2 way latching bistable
Operation: direct acting
Body: Brass
Internals: Stainless steel
Shading ring: without
Port: 3/8, 1/2, 3/4, 1, 11/4, 11/2 and 2 BSP, option NPT thread.
Orifice: 15mm, 20mm, 25mm, 35mm and 50mm (depending on port size)
Kv flow factor: 64.4 to 686.4 L/Min according to port size based on water with 1 Bar pressure difference.
Pressure: vacuum 10-6 Torr to 3.5 Bar (sizes 3/8 to 11/2)
Pressure: vacuum 10-6 Torr to 2.5 Bar (size 2 inch)
Seals: NBR standard, option FKM, VST, EPDM, Silicone, Neoprene, Hypalon, ECO and HNBR.
Media: air, water, light oil, vacuum 10-6 Torr and most fluids under 50CST and gases compatible with materials of construction.
Coil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Protection: IP65 with LED connector (included)
Voltages: 12vDC or 24vDC
LAD14, LAD15, LAD20, LAD25, LAD35, LAD40 and LAD50 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: LAD1450
Width: 52.00 mm
Height: 103.00 mm
Depth: 75.00 mm
Weight: 1.06 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 12vDC, 24vDC
Port Size: 1 thread, 1/2 thread, 11/2 thread, 11/4 thread, 2 thread, 3/4 thread, 3/8 thread
Function: 2/2 Latching
Operation: Assisted Lift
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, Silicone, FKM (Viton), VST
Approvals: IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (Low), Vacuum (Medium), Water
Options required: Manual Override
Orifice: 15mm, 20mm, 25mm, 35mm, 50mm