Special Offer>> 2 Stainless steel solenoid valve 0-6 Bar High Flow 2/2 Normally Closed (MD50CSC14) 50mm
£178.20
£537.94 incl. VATDescription
2 inch Stainless steel solenoid valve Queen MD50CSC14-HF (High Flow)
This is the high flow version of the standard MD series valve, the armature is slightly shorter to allow for more lift, but has a reduced working pressure of 6 Bar maximum.
Function: 2/2 way Normally Closed
Operation: Assisted Lift (Zero rated)
Port: 2 BSPT standard
Body: 316 stainless steel
Internals: stainless steel
Pressure: 0 to 6 Bar (Air/Water), 0 to 4.2 Bar (Oil)
Orifice: 50.0mm
Kv flow factor: 502 L/Min water with 1 bar pressure difference.
Sealing: EPDM standard; option NBR or FKM.
Media: vacuum (10 Torr with NBR sealing), compressed air, water, light oil, RO or pure water, diesel fuels and most liquids under 50CST and gas compatible with the materials of construction.
Coil: M16 26 Watt IP65 CE approved Class F DIN43650A, 100% duty rated.
Protection: IP65 with connector (Included)
Voltages: 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC and 230vAC.
Technical Specification
Brand: Kuhnway (Queen)
Model: MD50-HF-316-M16
Width: 112.00 mm
Height: 150.00 mm
Depth: 160.00 mm
Weight: 4.00 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 125vDC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 2 thread
Function: 2/2 Normally Closed
Operation: Assisted Lift
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar
Seals: EPDM, NBR, FKM (Viton)
Approvals: IP65
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Water
Options required: Shading Ring - without
Orifice: 50mm