3/4 Stainless solenoid valve 0-7 Bar 2/2 N/Closed
£154.44
£190.50 incl. VATDescription
3/4 inch Stainless Steel solenoid valve Shako SPU220A-06
Function: 2/2 way normally closed
Operation: Assisted lift (zero-rated)
Port: 3/4 BSP, option NPT or Rc thread
Pressure: 0 to 7 Bar (AC) or 0 to 5 Bar (DC Voltage).
Orifice: 20.0mm
Kv flow factor: 72 L/min based on water with 1 Bar pressure drop.
Seals: Viton standard, option EPDM, NBR or HNBR
Body: 316 stainless steel
Internals: Stainless steel
Seals: Viton standard, option EPDM, NBR or HNBR
Shading ring: Copper, option silver shading ring or without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.
Media: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.
Media temperature: -10°C to +180°C with Viton seals, -15°C to +80°C NBR, -40°C to +150°C HNBR, -5°C to +130°C EPDM seal material.
Coil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A
Protection: IP65 with connector (Included)
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 0-3 Bar Max.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.
HS Code 8481 8059
Technical Specification
Brand: Shako Co Ltd
Model: SPU22006
Width: 58.00 mm
Height: 107.00 mm
Depth: 71.00 mm
Weight: 0.95 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 110vDC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Port Size: 3/4 thread
Function: 2/2 Normally Closed
Operation: Assisted Lift
Pressure Maximum: 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar
Seals: EPDM, HNBR, NBR, FKM (Viton)
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)
Options required: Degreased, Shading Ring - without, Shading Ring - Silver
Orifice: 20mm