1/2 Stainless steel solenoid valve 0-10 Bar 2/2 Normally Closed (MD15) 16mm
£155.70
£233.56 incl. VATDescription
1/2 inch Stainless steel Queen solenoid valve MD15CSC14
Function: 2/2 way Normally Closed
Operation: Assisted Lift (Zero rated)
Port: 1/2 BSPT standard, option NPT thread
Pressure: 0 to 10 Bar (Air/Water), 0 to 7 Bar (Oil)
Body: 316 stainless steel 1.4408
Internals: stainless steel
Shading ring: Copper, option without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.
Sealing: EPDM standard; option NBR or FKM.
Media: vacuum (10 Torr with NBR sealing), compressed air, water, light oil, RO or pure water, diesel fuels and most liquids under 50CST and gas compatible with the materials of construction.
Orifice: 16mm
Kv flow factor: 52.9 L/Min water with 1 bar pressure difference.
Coil: M16 26 Watt IP65 CE approved Class F DIN43650A, 100% duty rated.
Coil option: M17 high power Class N DIN43650A IP65 coil, Pressure 0 to 16 Bar, Ambient Temp +50°C
Protection: IP65 with connector (Included)
Voltages: 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC and 230vAC.
Technical Specification
Brand: Kuhnway Corporation (Queen)
Model: MD15SCS14M16
Width: 52.00 mm
Height: 112.00 mm
Depth: 70.00 mm
Weight: 0.80 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 125vDC, 12vDC, 230VAC, 24vAC, 24vDC, 48vDC
Port Size: 1/2 thread
Function: 2/2 Normally Closed
Operation: Assisted Lift
Pressure Maximum: 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM, NBR, FKM (Viton)
Approvals: IP65
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Vacuum (Low), Water, Water (RO/Pure/Demin)
Options required: Shading Ring - without
Orifice: 15mm
Reviews
★★★★★4.5 / 5 4 reviews
Tim Malloy
★★★★★We purchased this valve for use on a water tank system where we required stainless steel. The valve is well built and perfect for the application. We have since purchased some 3/4bsp versions to use on our mains water supply and they have worked just as well. A very good general purpose valve if you require stainless steel.
Reviewed on 03/07/2014
Phil Stephens
★★★★★Perfect, on line purchase ideal 1/2 BSP 316 stainless steel 0 to 10 bar rated solenoid valve, and EPDM seals are fitted as standard at no extra cost, price is amazingly low but the quality is excellent. I'll be buying more of these 24vDC ones for sure. Hy-lok.
Reviewed on 10/07/2014
Simon B
★★★★★Fast shipping 5* will come back to this store again.
Reviewed on 29/04/2016
Harry
★★★★★Excellent service. Super fast delivery. quality valve. Highly recommended.
Reviewed on 02/06/2020