1/2 Stainless solenoid valve 0.5-15 Bar 2/2 N/Closed
£145.20
£183.37 incl. VATDescription
1/2 inch stainless steel solenoid valve Shako SPU225A-04 ®
Function: 2/2 way normally closed
Operation: pressure assisted, requires Min 0.5 Bar differential
Port: 1/2 BSPP, option NPT or Rc thread.
Pressure: 0.5 to 10 Bar differential, 15 Bar max working
Body: 316 stainless steel
Internals: stainless steel
Shading ring: Copper, option silver (AC or DC) or without ring ((DC only or AC with rectified DIN connector to DC)) for demin water, RO water, pure water and Adblue.
Orifice 13.0mm
Kv flow factor: 40 L/min based on water with 1 Bar pressure drop
Sealing: Viton (FKM) standard optional EPDM, NBR or HNBR
Media: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.
Option: degreased, with all traces of oil and grease removed.
Temperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.
Coil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A
Protection: IP65 with connector (Included)
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.
Coil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.
SPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.
Degreasing available for oxygen use.
HS code 84818030
Technical Specification
Brand: Shako Co Ltd
Model: SPU22504
Width: 48.00 mm
Height: 106.50 mm
Depth: 66.50 mm
Weight: 1.00 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 110vDC, 12vAC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Port Size: 1/2 thread
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM, HNBR, NBR, FKM (Viton)
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Water, Water (RO/Pure/Demin)
Options required: Degreased, Shading Ring - without, Shading Ring - Silver
Orifice: 13mm