1 BSP Water irrigation solenoid valve 2/2 latching
£26.98
£37.16 incl. VATDescription
1 inch Water irrigation Solenoid Valve PN22508AL
Function: 2/2 way latching / bi-stable
Operation: Pressure assisted (min 0.65 Bar pressure differential)
Port: 1 BSP, option NPT thread.
Pressure: 0.65 Bar to 10 Bar (150 psi)
Body: PA66 Glass Filled heavy duty Corrosion and UV resistant
Internals: stainless steel
Seals: NBR
Orifice: 25mm
Kv flow factor: 7.7 cubic meters an hour based on 1 psi pressure drop.
Media temperature: +60°C Max (140°F).
Included: Anti-water hammer design, flow controller, manual over ride and external bleed screw with removable metering pin for easy cleaning without disassembly of valve
Coil: IP66 2.2 Watt with 30cm lead wires 100% duty rated.
Voltages: Any 6 to 40vDC supply (Requires 4700μf capacitor) pulse 20 to 100 millisecond.
The PN22508AL latching function requires short electrical 6 volt to 40 volt DC pulse to stay open and then reverse polarity pulse to stay closed (swap +ve and -ve), repeat cycle for open and closed function. Requires 4700μf capacitor in circuit.
Ideally suited for irrigation systems, underground water systems, agricultural sprinkler systems, landscaping and green house water systems.
Technical Specification
Brand: Connexion
Model: PN22508AL
Width: 44.00 mm
Height: 133.00 mm
Depth: 119.00 mm
Weight: 0.51 kg
Valve / Product Type: Flow rate control, Solenoid
Body Material: Nylon
Voltage: 12vDC, 24vAC, 24vDC, 6vDC
Port Size: 1 thread
Function: 2/2 Latching
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: NBR
Approvals: IP66
Media: Water
Options required: Anti Water Hammer, Flow Control, Manual Override
Orifice: 25mm