11/2 Water irrigation solenoid valve 0.65-10 Bar 2/2 latching 6-40vDC (PN22514AL) 40mm
£66.78
£110.36 incl. VATDescription
11/2 inch Water irrigation Solenoid Valve PN22514AL
Function: 2/2 way latching / bi-stable
Operation: Pressure assisted (min 0.65 Bar pressure differential)
Port: 11/2 BSP, option NPT thread.
Pressure: 0.65 Bar to 10 Bar (150 psi)
Body: PA66 Glass Filled heavy-duty Corrosion and UV resistant
Internals: stainless steel
Seals: NBR
Orifice: 40mm
Kv flow factor: 25 cubic meters an hour based on 1 psi pressure drop.
Media temperature: +60°C Max (140°F).
Included: Anti-water hammer design, manual over ride and external bleed screw with removable metering pin for easy cleaning without disassembly of valve
Coil: IP66 2.2 Watt with 30cm lead wires 100% duty rated.
Voltages: Any 6 to 40 volt DC supply (Requires 4700μf capacitor) pulse 20 to 100 millisecond.
The PN22514AL latching function requires short electrical 6 volt to 40 volt DC pulse to stay open and then reverse polarity pulse to stay closed (swap +ve and -ve), repeat cycle for open and closed function. Requires 4700μf capacitor in circuit.
Ideally suited for irrigation systems, underground water systems, agricultural sprinkler systems, landscaping and green house water systems.
Technical Specification
Brand: Connexion
Model: PN22514AL
Width: 61.00 mm
Height: 104.00 mm
Depth: 190.00 mm
Weight: 0.51 kg
Valve / Product Type: Solenoid
Body Material: Nylon
Voltage: 12vDC, 24vDC, 6vDC
Port Size: 11/2 thread
Function: 2/2 Latching
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: NBR
Approvals: IP66
Media: Water
Options required: Anti Water Hammer, Manual Override
Orifice: 40mm