1/2 to 2 inch 316 Stainless steel pressure sustaining valve fluid + gas 1-5 or 4-10 Bar (RFT)
£218.29
£288.65 incl. VATDescription
Pressure Sustaining Valve Direct Acting Z-Tide RFT
Function: pressure sustaining or back pressure valve (BPV)
Operation: Direct acting
Port: 1/2, 3/4, 1, 11/2 or 2 BSPT, option NPT or BSPP (G) thread.
Body: 316 stainless steel, option Duplex 316 stainless steel
Internals: stainless steel
Seals: NBR +60°C option Viton +100°C and EPDM.
Media: air, water, pure water, light oil and other fluids and gases under 40 CST and gases compatible with materials of construction.
Max inlet pressure: 25 Bar
Test pressure: 35 Bar
Back Pressure adjustment: 1 to 5 or 4 to 10 Bar, displayed by stainless steel pressure gauge (Included)
Temperature Range: -15°C to +100°C (According to seal)
Pressure sustaining valves are designed to maintain a pre-set back pressure, if the back pressure drops to the set value the valve will begin to close to maintain back pressure, when pressure returns the valve will begin to open again.
Typically used to maintain pressure for critical systems upstream, by limiting flow to non-critical systems down stream if required to do so.
Technical Specification
Brand: Z-Tide Co Ltd
Model: RFT
Width: 75.00 mm
Height: 80.00 mm
Depth: 70.00 mm
Weight: 1.30 kg
Valve / Product Type: Pressure Sustaining
Body Material: Stainless Steel
Port Size: 1 thread, 1/2 thread, 11/2 thread, 11/4 thread, 2 thread
Operation: Direct Acting
Pressure Maximum: 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: NBR, FKM (Viton)
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Water, Water (RO/Pure/Demin)
Orifice: 15mm, 20mm, 25mm, 32mm, 40mm, 50mm