**11/2" Plastic Solenoid Valves 2/2 NC: Failsafe Closed**

Valve / Product Type

Pressure Reducing

Pressure reducing valves (PRV) reduce and maintain stable outlet pressure

Solenoid

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

1/2 thread

valves with 1/2 inch threaded ports

11/2 thread

valves with 11/2 inch threaded ports

50mm

Media

Fluid (Slight Acid/Alkali)

Fluid (Stong Acid/Alkali)

Gases (Slight Acid/Alakli)

Gases (Strong Acid/Alkali)

Water

Water (RO/Pure/Demin)

Body Material

Pressure Maximum

Seals

ECO

ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

HNBR

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

Hypalon

Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Neoprene

Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.

Silicone

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

VST

VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C

Voltage

12vDC

12 volts Direct Current

24vDC

24 volts Direct Current

24vAC

24 volts 50/60Hz Alternating Current

48vAC

48 volts 50/60Hz alternating current

48vDC

48 volts Direct Current

110vAC

110 volts 50/60Hz Alternating Current

110vDC

110 volts Direct Current

230VAC

230 volts 50/60Hz Alternating Current

Approvals

ATEX Zone II GD

hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.

ATEX Exm

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

IP54

Dust protected and protected against splashing water

IP65

Dust tight and protected against water jets

IP66

Dust protected and protected against powerful water jets.

IP67

Dust protected and protected against immersion in water

CSA

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

UL

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

Orifice

15mm

Valve orifice or sealing face with diameter 15mm

40mm

Valve orifice or sealing face with diameter 40mm

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Degreased

Oil and grease removed typically for oxygen or paint spray use.

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Bracket

Valve has the facility to be supplied with a bracket for mounting and securing.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Shading Ring - Silver

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Only Show Items In Stock

Hide spare parts

More 11/2 Plastic Solenoid Valves 2/2 N/Closed

Filters

27 IN STOCK

14 IN STOCK

7 IN STOCK