Solenoid valve world
0
£0.00
General Valves
WRAS
Natural Gas
Wizard
Ball Valves
Pneumatics
Contact Us
Home
More normally closed plastic water solenoid valves
Plastic water valves
Plastic solenoid valves
Search wizard original
More 3/8 plastic water valves - normally closed
More 3/8 plastic water valves - normally closed
3/8 inch Plastic water solenoid valve Normally Closed power to open.
Filters
Price
Show filters
0
Port Size
3/8 thread
0
valves with 3/8 inch threaded ports
3/8 Push Fit
0
10mm
0
Media
Fluid (Slight Acid/Alkali)
0
Gases (Slight Acid/Alakli)
0
Water
0
Water (RO/Pure/Demin)
0
Body Material
Delrin (POM)
0
Nylon
0
Pressure Maximum
2 Bar
0
2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa
2.5 Bar
0
2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa
3 Bar
0
3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa
3.5 Bar
0
3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa
4 Bar
0
4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa
4.5 Bar
0
4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa
5 Bar
0
5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa
5.5 Bar
0
5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa
6 Bar
0
6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa
6.5 Bar
0
6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa
7 Bar
0
7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa
7.5 Bar
0
7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa
8 Bar
0
8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa
8.5 Bar
0
8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa
9 Bar
0
9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa
10 Bar
0
10 Bar = 147.1 psi = 1 MPa
Seals
ECO
0
ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C
EPDM
0
EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels
FKM (Viton)
0
FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.
HNBR
0
HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.
Hypalon
0
Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.
NBR
0
NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.
Neoprene
0
Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.
Silicone
0
Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.
VST
0
VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C
Voltage
12vDC
0
12 volts Direct Current
12vAC
0
12 volts 50/60Hz Alternating Current
24vDC
0
24 volts Direct Current
24vAC
0
24 volts 50/60Hz Alternating Current
48vAC
0
48 volts 50/60Hz alternating current
48vDC
0
48 volts Direct Current
110vAC
0
110 volts 50/60Hz Alternating Current
110vDC
0
110 volts Direct Current
230VAC
0
230 volts 50/60Hz Alternating Current
Approvals
ATEX Zone II GD
0
hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.
ATEX Exm
0
ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65
IP54
0
Dust protected and protected against splashing water
IP65
0
Dust tight and protected against water jets
IP67
0
Dust protected and protected against immersion in water
IPX0 (Faston Tag)
0
No protection against foreign object or water ingress.
CSA
0
CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.
UL
0
UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.
WRAS
0
WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.
Orifice
11mm
0
Valve orifice or sealing face with diameter 11mm
15mm
0
Valve orifice or sealing face with diameter 15mm
Options required
Anti Water Hammer
0
Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.
Mounting Holes
0
Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.
Shading Ring - Silver
0
The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.
Only Show Items In Stock
Hide spare parts
Hide filters
0
Showing 1 - 5 of
5 total products
Sort By Name: A-Z
Sort By Name: Z-A
Sort By Price: Low to high
Sort By Price: High to low
Sort By Part Number: A-Z
Sort By Part Number: Z-A
Sort By Stock
Sort By Best Sellers
3/8 Push Fit plastic water solenoid valve 0.2-10 Bar 2/2 normally closed (1196BC)
£35.46
£20.56
inc VAT
View options
97 IN STOCK
10mm Push Fit Plastic water solenoid valve 0.2-10 Bar 2/2 normally closed (1156BC)
£35.46
£23.06
inc VAT
View options
133 IN STOCK
3/8 BSP Male plastic water solenoid valve 0.2-10 Bar 2/2 normally closed (4115BC)
£30.06
£15.74
inc VAT
View options
229 IN STOCK
3/8 BSP Female plastic water solenoid valve 0.2-10 Bar 2/2 normally closed (4105BC)
£30.06
£15.74
inc VAT
View options
184 IN STOCK
3/8 Delrin plastic solenoid valve 0.5-10 Bar 2/2 Normally Closed (PA14) 15mm
£108.24
£87.74
inc VAT
View options
7 IN STOCK
Show 10
Show 20
Show 50
Show 100
1
