Solenoid valve world
0
£0.00
General Valves
WRAS
Natural Gas
Wizard
Ball Valves
Pneumatics
Contact Us
Home
More normally closed plastic water solenoid valves
Plastic water valves
Plastic solenoid valves
Search wizard original
More 2 plastic water valves - normally closed
More 2 plastic water valves - normally closed
2 inch Plastic water solenoid valve Normally Closed power to open.
Filters
Price
Show filters
0
Valve / Product Type
Flow rate control
0
Flow regulating valves with manual or electric modulating 4-20mA control.
Motor Actuated
0
Solenoid
0
Valves controlled by electrical signal via a solenoid or electro magnet.
Port Size
2 thread
0
valves with 2 inch threaded ports
63mm
0
Media
Air
0
Fluid (Slight Acid/Alkali)
0
Fluid (Stong Acid/Alkali)
0
Fluid Thick 51>500cSt
0
Gases (Slight Acid/Alakli)
0
Gases (Strong Acid/Alkali)
0
Water
0
Water (RO/Pure/Demin)
0
Body Material
Nylon
0
UPVC
0
Function
2/2 Normally Closed
0
2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open
2/2 Normally Open
0
2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close
Power Open/Power Close
0
Valve requires power to open and power to close, no power valves stays in position.
Pressure Maximum
0.02 Bar (20 mBar)
0
0.02 Bar = 20 millibars = 0.29psi = 2 Kpa
0.1 Bar (100 mBar)
0
0.1 Bar = 100 millibars = 1.47 psi = 1kPa
0.2 Bar (200 mBar)
0
0.2 Bar = 200 millibars = 2.94 psi = 20kPa
0.3 Bar (300 mBar)
0
0.3 Bar = 300 millibars = 4.41 psi = 30 kPa
0.4 Bar (400 mBar)
0
0.4 Bar = 400 millibars = 4.41 psi = 40 kPa
0.5 Bar (500 mBar)
0
0.5 Bar = 500 millibars = 7.36 psi = 50 kPa
0.6 Bar (600 mbar)
0
0.6 Bar = 600 millibars = 8.83 psi = 60 kPa
0.7 Bar (700 mBar)
0
0.7 Bar = 700 millibars = 10.3 psi = 70 kPa
0.8 Bar (800 mBar)
0
0.8 Bar = 800 millibars = 11.77 psi = 80 kPa
1 Bar
0
1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa
1.2 Bar
0
1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa
1.3 Bar
0
1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa
1.4 Bar
0
1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa
1.5 Bar
0
1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa
1.6 Bar
0
1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa
2 Bar
0
2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa
2.5 Bar
0
2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa
3 Bar
0
3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa
3.5 Bar
0
3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa
4 Bar
0
4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa
4.5 Bar
0
4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa
5 Bar
0
5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa
5.5 Bar
0
5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa
6 Bar
0
6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa
6.5 Bar
0
6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa
7 Bar
0
7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa
7.5 Bar
0
7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa
8 Bar
0
8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa
8.5 Bar
0
8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa
9 Bar
0
9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa
10 Bar
0
10 Bar = 147.1 psi = 1 MPa
Seals
EPDM
0
EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels
FKM (Viton)
0
FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.
NBR
0
NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.
Voltage
6vDC
0
6 volts Direct Current
12vDC
0
12 volts Direct Current
12vAC
0
12 volts 50/60Hz Alternating Current
24vDC
0
24 volts Direct Current
24vAC
0
24 volts 50/60Hz Alternating Current
48vAC
0
48 volts 50/60Hz alternating current
48vDC
0
48 volts Direct Current
110vAC
0
110 volts 50/60Hz Alternating Current
110vDC
0
110 volts Direct Current
230VAC
0
230 volts 50/60Hz Alternating Current
Approvals
ATEX Zone II GD
0
hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.
ATEX Exm
0
ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65
IP65
0
Dust tight and protected against water jets
IP66
0
Dust protected and protected against powerful water jets.
IP67
0
Dust protected and protected against immersion in water
Orifice
50mm
0
Valve orifice or sealing face with diameter 50mm
55mm
0
Valve orifice or sealing face with diameter 55mm
Operation
Direct Acting
0
Directly controls flow without external pressure assistance operates from vacuum upwards.
Pressure Assisted
0
Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.
Options required
Anti Water Hammer
0
Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.
Bi-Directional Flow
0
Can control flow in both directions
Flow Control
0
Flow regulation to control the amount of flow.
Manual Override
0
A facility to manually move the valve into the fully actuated position via a button, lever or key.
Mounting Holes
0
Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.
Position Feedback Closed
0
The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.
Position Feedback Open+Closed
0
The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.
Position indication Visual
0
The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.
Only Show Items In Stock
Hide spare parts
Hide filters
0
Showing 1 - 4 of
4 total products
Sort By Name: A-Z
Sort By Name: Z-A
Sort By Price: Low to high
Sort By Price: High to low
Sort By Part Number: A-Z
Sort By Part Number: Z-A
Sort By Stock
Sort By Best Sellers
2 DN50 UPVC ball valve motor actuated Power Open/Close + Failsafe 12-24vAC/DC or 110-240vAC (ABV20P)
£365.52
£274.14
inc VAT
View options
69 IN STOCK
2 inch Water irrigation solenoid valve 0.65-10 Bar 2/2 Normally Closed (PN22520) 50mm
£127.68
£77.26
inc VAT
View options
29 IN STOCK
2 BSP Nylon water solenoid valve 0.3-10 Bar 2/2 Normally Closed c/w override and flow controller (GP50) 55mm
£230.46
£169.00
inc VAT
View options
11 IN STOCK
*On Sale* 2 BSP Nylon solenoid valve 0.3-10 Bar 2/2 Normally Closed (S4801) 55mm
£241.12
£132.62
inc VAT
View options
3 IN STOCK
Show 10
Show 20
Show 50
Show 100
1