Solenoid valve world
0
£0.00
General Valves
WRAS
Natural Gas
Wizard
Ball Valves
Pneumatics
Contact Us
Home
More stainless 2/2 n/closed - pressure assisted
2/2 way failsafe closed - pressure assisted
Solenoid valves according to function
Search wizard original
More 11/2 stainless 2/2 n/closed pressure assisted
More 11/2 Stainless 2/2 N/Closed Pressure Assisted
11/2 inch Stainless steel solenoid valves, 2/2 way normally closed pressure assisted up to 40 Bar.
Filters
Price
Show filters
0
Port Size
3/8 thread
0
valves with 3/8 inch threaded ports
1/2 thread
0
valves with 1/2 inch threaded ports
3/4 thread
0
valves with 3/4 inch threaded ports
1 thread
0
valves with 1 inch threaded ports
11/4 thread
0
valves with 11/4 inch threaded ports
11/2 thread
0
valves with 11/2 inch threaded ports
2 thread
0
valves with 2 inch threaded ports
Media
Air
0
Fluid (Non Aggressive)
0
Fluid (Slight Acid/Alkali)
0
Gases (Non Aggressive)
0
Gases (Slight Acid/Alakli)
0
Oils + Fuels 50cSt Max
0
Steam
0
Water
0
Water (RO/Pure/Demin)
0
Pressure Maximum
3 Bar
0
3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa
3.5 Bar
0
3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa
4 Bar
0
4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa
4.5 Bar
0
4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa
5 Bar
0
5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa
5.5 Bar
0
5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa
6 Bar
0
6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa
6.5 Bar
0
6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa
7 Bar
0
7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa
7.5 Bar
0
7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa
8 Bar
0
8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa
8.5 Bar
0
8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa
9 Bar
0
9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa
10 Bar
0
10 Bar = 147.1 psi = 1 MPa
25 Bar
0
25 Bar = 367.8 psi = 2.5 MPa
30 Bar
0
30 Bar = 441.3 psi = 3 MPa
35 Bar
0
35 Bar = 514.9 psi = 3.5 MPa
40 Bar
0
40 Bar = 588.4 psi = 4 MPa
Seals
EPDM
0
EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels
FKM (Viton)
0
FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.
HNBR
0
HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.
NBR
0
NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.
PTFE (Teflon)
0
PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C
Voltage
12vDC
0
12 volts Direct Current
12vAC
0
12 volts 50/60Hz Alternating Current
24vDC
0
24 volts Direct Current
24vAC
0
24 volts 50/60Hz Alternating Current
48vAC
0
48 volts 50/60Hz alternating current
48vDC
0
48 volts Direct Current
110vAC
0
110 volts 50/60Hz Alternating Current
110vDC
0
110 volts Direct Current
230VAC
0
230 volts 50/60Hz Alternating Current
200vDC
0
200 volts Direct Current
380vAC
0
380 volts 50/60Hz Alternating Current
Approvals
ATEX Zone II GD
0
hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.
ATEX Exm
0
ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65
IP54
0
Dust protected and protected against splashing water
IP65
0
Dust tight and protected against water jets
IP67
0
Dust protected and protected against immersion in water
CSA
0
CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.
UL
0
UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.
Orifice
15mm
0
Valve orifice or sealing face with diameter 15mm
20mm
0
Valve orifice or sealing face with diameter 20mm
25mm
0
Valve orifice or sealing face with diameter 25mm
30mm
0
Valve orifice or sealing face with diameter 30mm
35mm
0
Valve orifice or sealing face with diameter 35mm
38mm
0
Valve orifice or sealing face with diameter 38mm
50mm
0
Valve orifice or sealing face with diameter 50mm
Options required
Degreased
0
Oil and grease removed typically for oxygen or paint spray use.
Manual Override
0
A facility to manually move the valve into the fully actuated position via a button, lever or key.
Shading Ring - Silver
0
The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.
Shading Ring - without
0
The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.
Only Show Items In Stock
Hide spare parts
Hide filters
0
Showing 1 - 3 of
3 total products
Sort By Name: A-Z
Sort By Name: Z-A
Sort By Price: Low to high
Sort By Price: High to low
Sort By Part Number: A-Z
Sort By Part Number: Z-A
Sort By Stock
Sort By Best Sellers
3/8-2 inch stainless steel solenoid valve 0.5-40 Bar 2/2 Normally Closed (SASH) 15-50mm
£1,061.40
£860.47
inc VAT
View options
11/2 Stainless steel solenoid valve 0.5-15 Bar 2/2 Normally Closed (SPU225A-14) 38mm
£366.61
£290.40
inc VAT
View options
18 IN STOCK
11/2 Stainless steel steam solenoid valve 1-10 Bar 2/2 Normally Closed (SUS40) 30mm
£583.52
£473.06
inc VAT
View options
3 IN STOCK
Show 10
Show 20
Show 50
Show 100
1
