0
£0.00
General Valves
WRAS
Natural Gas
Wizard
Ball Valves
Pneumatics
Contact Us
Home
More 1/4 stainless steel valves
Stainless steel solenoid valves
Search wizard original
More 1/4 stainless 3/2 + 5/2 way valves
More 1/4 Stainless 3/2 + 5/2 way valves
1/4 inch Stainless steel 5 and 3 way solenoid valves for diverting flow.
Filters
Price
Show filters
0
Valve / Product Type
Coaxial
0
Solenoid
0
Valves controlled by electrical signal via a solenoid or electro magnet.
Port Size
1/8 thread
0
valves with 1/8 inch threaded ports
1/4 thread
0
valves with 1/4 inch threaded ports
3/8 thread
0
valves with 3/8 inch threaded ports
1/2 thread
0
valves with 1/2 inch threaded ports
3/4 thread
0
valves with 3/4 inch threaded ports
Namur mount
0
valves with Namur interface mounting
Sub Base Mount
0
Media
Air
0
Fluid >50cSt (Non Aggressive)
0
Fluid >50cSt (Slight Acid/Alkali)
0
Fluid Thick 51>500cSt
0
Gases (Non Aggressive)
0
Gases (Slight Acid/Alakli)
0
Oils + Fuels >50cSt Max
0
Vacuum (Low)
0
Vacuum (Medium)
0
Vacuum (High)
0
Water
0
Water (RO/Pure/Demin)
0
Body Material
Aluminium
0
Brass
0
Stainless Steel
0
Function
3/2 Normally Closed
0
3 ports with 2 positions. Power off inlet closed, outlet open to exhaust - power on inlet open to outlet with exhaust closed.
3/2 Normally Open
0
3 ports 2 positions. Inlet open to outlet with exhaust closed - power on inlet closed with outlet open to exhaust.
3/2 Universal
0
3 ports, 2 positions flow can be in any direction. Can be piped as 3/2 normally closed flow into inlet, 3/2 normally open flow into exhaust, 3/2 diverting flow into outlet.
5/2 Single Acting
0
5 ports 2 positions (1 inlet, 2 outlets, 2 exhaust ports). Power to coil Cylinder fully extends - Power off cylinder fully retracts (or visa versa)
5/2 Double Acting
0
Power to left coil Cylinder fully extends, power to right coil cylinder fully retracts, power off cylinder stays put fully extended or retracted.
Pressure Maximum
0.02 Bar (20 mBar)
0
0.02 Bar = 20 millibars = 0.29psi = 2 Kpa
0.1 Bar (100 mBar)
0
0.1 Bar = 100 millibars = 1.47 psi = 1kPa
0.2 Bar (200 mBar)
0
0.2 Bar = 200 millibars = 2.94 psi = 20kPa
0.3 Bar (300 mBar)
0
0.3 Bar = 300 millibars = 4.41 psi = 30 kPa
0.4 Bar (400 mBar)
0
0.4 Bar = 400 millibars = 4.41 psi = 40 kPa
0.5 Bar (500 mBar)
0
0.5 Bar = 500 millibars = 7.36 psi = 50 kPa
0.6 Bar (600 mbar)
0
0.6 Bar = 600 millibars = 8.83 psi = 60 kPa
0.7 Bar (700 mBar)
0
0.7 Bar = 700 millibars = 10.3 psi = 70 kPa
0.8 Bar (800 mBar)
0
0.8 Bar = 800 millibars = 11.77 psi = 80 kPa
1 Bar
0
1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa
1.2 Bar
0
1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa
1.3 Bar
0
1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa
1.4 Bar
0
1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa
1.5 Bar
0
1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa
1.6 Bar
0
1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa
2 Bar
0
2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa
2.5 Bar
0
2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa
3 Bar
0
3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa
3.5 Bar
0
3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa
4 Bar
0
4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa
4.5 Bar
0
4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa
5 Bar
0
5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa
5.5 Bar
0
5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa
6 Bar
0
6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa
6.5 Bar
0
6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa
7 Bar
0
7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa
7.5 Bar
0
7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa
8 Bar
0
8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa
8.5 Bar
0
8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa
9 Bar
0
9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa
10 Bar
0
10 Bar = 147.1 psi = 1 MPa
12 Bar
0
12 Bar = 176.52 psi = 1.2 MPa
13 Bar
0
13 Bar = 191.23 psi = 1.3 MPa
14 Bar
0
14 Bar = 205.94 psi = 1.4 MPa
15 Bar
0
15 Bar = 220.65 psi = 1.5 MPa
16 Bar
0
16 Bar = 235.36 psi = 1.6 MPa
17 Bar
0
17 Bar = 250.07 psi = 1.7 MPa
18 Bar
0
18 Bar = 264.78 psi = 1.8 MPa
20 Bar
0
20 Bar = 294.2 psi = 2 MPa
25 Bar
0
25 Bar = 367.8 psi = 2.5 MPa
30 Bar
0
30 Bar = 441.3 psi = 3 MPa
35 Bar
0
35 Bar = 514.9 psi = 3.5 MPa
40 Bar
0
40 Bar = 588.4 psi = 4 MPa
50 Bar
0
50 Bar = 735.5 psi = 5 MPa
60 Bar
0
60 Bar = 882.6 psi = 6 MPa
64 Bar
0
64 Bar = 941.4 psi = 6.4 MPa
70 Bar
0
70 Bar = 1029.7 psi = 7 MPa
Seals
EPDM
0
EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels
FKM (Viton)
0
FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.
FFKM (Kalrez)
0
FF-KM Perfluoroelastomer - known as Kalrez, Chemraz or Perlast. Good most Solvents, Chemicals + excellent resistance to almost every thing, far surpassing FKM. -40°C to +250°C.
NBR
0
NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.
Polyurethane
0
Polyurethane excellent durability, flexibility, and resistance to abrasion and chemicals, commonly used in various sealing applications, such as hydraulic systems and pneumatic cylinders. -40°C to 100°C
PTFE (Teflon)
0
PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C
Silicone
0
Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.
Approvals
ATEX Zone II GD
0
hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.
ATEX Exm
0
ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65
ATEX Exd
0
ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil
ATEX Exia
0
ATEX protection by intrinsic safety, II 2 G Ex ia IIB/IIC T4 or T6.
IP54
0
Dust protected and protected against splashing water
IP65
0
Dust tight and protected against water jets
IP66
0
Dust protected and protected against powerful water jets.
IP67
0
Dust protected and protected against immersion in water
IP68
0
Dust protected and protected against the effects of continuous immersion in water.
CSA
0
CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.
CUTR
0
CUTR approval stands for "Center for Urban Transportation Research" approval, indicating compliance with transportation standards and regulations for projects or products.
GOST
0
GOST approval is a certification indicating compliance with Russian safety standards for products, essential for entering the Russian market.
Inmetro
0
INMETRO approval certifies products for compliance with Brazilian safety standards, ensuring quality, safety, and reliability for consumers in Brazil.
SIL3
0
SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.
UL
0
UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.
Orifice
1.0mm
0
Valve orifice or sealing face with diameter 1mm
1.2mm
0
Valve orifice or sealing face with diameter 1.2mm
1.3mm
0
Valve orifice or sealing face with diameter 1.3mm
1.6mm
0
Valve orifice or sealing face with diameter 1.6mm
1.8mm
0
Valve orifice or sealing face with diameter 1.8mm
2.0mm
0
Valve orifice or sealing face with diameter
2.2mm
0
Valve orifice or sealing face with diameter 2.2mm
2.5mm
0
Valve orifice or sealing face with diameter 2.5mm
3.0mm
0
Valve orifice or sealing face with diameter 3mm
3.5mm
0
Valve orifice or sealing face with diameter 3.5mm
4.0mm
0
Valve orifice or sealing face with diameter 4mm
5.0mm
0
Valve orifice or sealing face with diameter 5
6.0mm
0
Valve orifice or sealing face with diameter 6mm
6.5mm
0
Valve orifice or sealing face with diameter 6.5mm
7.5mm
0
Valve orifice or sealing face with diameter 7.5
9.0mm
0
Valve orifice or sealing face with diameter 9mm
10mm
0
Valve orifice or sealing face with diameter 10mm
Operation
Direct Acting
0
Directly controls flow without external pressure assistance operates from vacuum upwards.
Pressure Assisted
0
Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.
Voltage
12vDC
0
12 volts Direct Current
12vAC
0
12 volts 50/60Hz Alternating Current
24vDC
0
24 volts Direct Current
24vAC
0
24 volts 50/60Hz Alternating Current
48vAC
0
48 volts 50/60Hz alternating current
48vDC
0
48 volts Direct Current
110vAC
0
110 volts 50/60Hz Alternating Current
110vDC
0
110 volts Direct Current
230VAC
0
230 volts 50/60Hz Alternating Current
200vDC
0
200 volts Direct Current
Options required
Bi-Directional Flow
0
Can control flow in both directions
Degreased
0
Oil and grease removed typically for oxygen or paint spray use.
Manifold
0
A group of multiple valves together on one manifold, simple layout streamline control and space saving.
Manual Override
0
A facility to manually move the valve into the fully actuated position via a button, lever or key.
Manual Reset
0
A facility that prevents a valve from returning to its previous position without manual intervention by a lever or button. Typically used for safety systems.
Mounting Bracket
0
Valve has the facility to be supplied with a bracket for mounting and securing.
Mounting Holes
0
Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.
Outlet - 90 Degree right angle
0
The outlet port is at right angles to inlet port, ideal for space efficiency.
Position Feedback - Closed
0
The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.
Position Feedback - Open + Closed
0
The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.
Shading Ring - Silver
0
The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.
Shading Ring - without
0
The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.
Only Show Items In Stock
Hide spare parts
Hide filters
0
Showing 1 - 10 of
21 total products
Sort By Name: A-Z
Sort By Name: Z-A
Sort By Price: Low to high
Sort By Price: High to low
Sort By Part Number: A-Z
Sort By Part Number: Z-A
Sort By Stock
1/4 inch ATEX Exd Stainless steel solenoid valve 0-10 Bar 3/2 way Universal (Rotex 30334-5) 5mm
£414.15
£220.43
inc VAT
View options
2 IN STOCK
1/4 Stainless steel solenoid valve 0-10 Bar 3/2 universal (306390) 6mm
£576.42
£422.70
inc VAT
View options
2 IN STOCK
Coaxial solenoid valve 3/2 way 0-40 Bar Brass + Stainless steel 1/4, 3/8, 1/2, 3/4 (37010) DN10
£570.82
£243.40
inc VAT
View options
1 IN STOCK
1/8, 1/4, 3/8, 1/2 ATEX Exd Stainless steel solenoid valve 0-63 Bar 3/2 way (Rotex 30126, 30206, 30310) 1.2-4mm
£391.05
£208.14
inc VAT
View options
1 IN STOCK
1/4 Stainless steel solenoid valve 25-70 Bar 3/2 Normally Closed (EN56651-23) 2mm
£1,199.45
£972.40
inc VAT
View options
Namur ATEX Exia Aluminium or Stainless steel 3/2 5/2 solenoid valve 2-8 Bar Mono Stable (Rotex 51450V02IS-6) 6mm
£495.82
£274.35
inc VAT
View options
1/4, 3/8, 1/2, Stainless steel air solenoid valve 1.5-10 Bar 5/2 single acting (SPU520S)
£387.50
£213.13
inc VAT
View options
1/4 ATEX Exia Stainless steel solenoid valve 3/2 Universal 0-10 Bar (Rotex P3017V01R-5) 5mm
£1,192.63
£634.79
inc VAT
View options
Namur ATEX Exia Aluminium or Stainless steel solenoid valve 2-8 Bar 3/2 5/2 bi-stable (Rotex 57450V02IS-6) 6mm
£504.10
£278.94
inc VAT
View options
1/4, 3/8, 1/2, 316 Stainless steel air solenoid valve 1.5-10 Bar 5/2 double acting (SPU520D)
£463.27
£254.80
inc VAT
View options
Show 10
Show 20
Show 50
Show 100
1
2
3
