Solenoid valve world
0
£0.00
General Valves
WRAS
Natural Gas
Wizard
Ball Valves
Pneumatics
Contact Us
Home
Dn200
Solenoid valves by thread, flange + manifold size
Search wizard original
Ductile iron
Ductile Iron
Search For Ductile Iron Flanged Solenoid Valves Only.
Filters
Price
Show filters
0
Port Size
2 inch Flange DN50
0
21/2 inch Flange DN65
0
3 inch Flange DN80
0
4 inch Flange DN100
0
5 inch Flange DN125
0
6 inch Flange DN150
0
8 inch Flange DN200
0
10 inch Flange DN250
0
12 inch Flange DN300
0
14 inch Flange DN350
0
16 inch Flange DN400
0
18 inch Flange DN450
0
20 inch Flange DN500
0
Media
Fluid (Non Aggressive)
0
Oils + Fuels 50cSt Max
0
Water
0
Function
2/2 Normally Closed
0
2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open
2/2 Normally Open
0
2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close
Pressure Maximum
3 Bar
0
3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa
3.5 Bar
0
3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa
4 Bar
0
4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa
4.5 Bar
0
4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa
5 Bar
0
5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa
5.5 Bar
0
5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa
6 Bar
0
6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa
6.5 Bar
0
6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa
7 Bar
0
7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa
7.5 Bar
0
7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa
8 Bar
0
8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa
8.5 Bar
0
8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa
9 Bar
0
9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa
10 Bar
0
10 Bar = 147.1 psi = 1 MPa
12 Bar
0
12 Bar = 176.52 psi = 1.2 MPa
13 Bar
0
13 Bar = 191.23 psi = 1.3 MPa
14 Bar
0
14 Bar = 205.94 psi = 1.4 MPa
15 Bar
0
15 Bar = 220.65 psi = 1.5 MPa
16 Bar
0
16 Bar = 235.36 psi = 1.6 MPa
Seals
EPDM
0
EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels
FKM (Viton)
0
FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.
NBR
0
NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.
Voltage
12vDC
0
12 volts Direct Current
24vDC
0
24 volts Direct Current
24vAC
0
24 volts 50/60Hz Alternating Current
110vAC
0
110 volts 50/60Hz Alternating Current
125vDC
0
125 volts Direct Current
230VAC
0
230 volts 50/60Hz Alternating Current
Approvals
ATEX Zone II GD
0
hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.
ATEX Exm
0
ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65
IP65
0
Dust tight and protected against water jets
Orifice
50mm
0
Valve orifice or sealing face with diameter 50mm
65mm
0
Valve orifice or sealing face with diameter 65mm
80mm
0
Valve orifice or sealing face with diameter 80mm
125mm
0
Valve orifice or sealing face with diameter 125mm
150mm
0
Valve orifice or sealing face with diameter 150mm
200mm
0
Valve orifice or sealing face with diameter 200mm
250mm
0
Valve orifice or sealing face with diameter 250mm
300mm
0
Valve orifice or sealing face with diameter 300mm
350mm
0
Valve orifice or sealing face with diameter 350mm
400mm
0
Valve orifice or sealing face with diameter 400mm
450mm
0
Valve orifice or sealing face with diameter 450mm
500mm
0
Valve orifice or sealing face with diameter 500mm
Options required
Anti Water Hammer
0
Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.
Manual Override
0
A facility to manually move the valve into the fully actuated position via a button, lever or key.
Only Show Items In Stock
Hide spare parts
Hide filters
0
Showing 1 - 2 of
2 total products
Sort By Name: A-Z
Sort By Name: Z-A
Sort By Price: Low to high
Sort By Price: High to low
Sort By Part Number: A-Z
Sort By Part Number: Z-A
Sort By Stock
Sort By Best Sellers
DN50-500 flanged ductile iron solenoid valve 0.7-10 Bar water + fluid 2/2 Normally Closed Z-Tide (BFE-D)
£774.28
£584.70
inc VAT
View options
47 IN STOCK
DN50-500 flanged ductile iron solenoid valve 0.7-10 Bar water + fluid 2/2 Normally Open Z-Tide (NOBFE-D)
£636.24
£769.85
inc VAT
View options
47 IN STOCK
Show 10
Show 20
Show 50
Show 100
1
