2 Nylon solenoid valve 0.3-10 Bar 2/2 Normally Closed c/w override and flow controller (GP50) 55mm
£169.00
£230.46 incl. VATDescription
2 inch Plastic Water Solenoid Valve GP50
Function: 2/2 way normally closed with manual override, flow regulator with anti water hammer design
Operation: pressure assisted (requires minimum 0.3 Bar pressure difference)
Port 2 BSP thread, option NPT
Pressure: 0.3 to 10 Bar
Body: reinforced Nylon
Internals: stainless steel
Seals: NBR
Temperature: +5°C to +50°C
Media: water and other fluids under 50 CST or gases compatible with materials of construction.
Orifice: 55mm
Kv flow factor: 600 L/min based on water with 1 Bar pressure difference
Open/close time: 100 milliseconds max
Coil: 5 Watt DIN43650B IP65 100% continuously rated
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.
Coil option: 6.8 Watt higher power coil can be used with stronger armature spring for slightly contaminated media.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC and 220vDC or 12vAC, 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz.
Technical Specification
Brand: AAA (Sunwell)
Model: GP50
Width: 126.00 mm
Height: 190.00 mm
Depth: 170.00 mm
Weight: 2.00 kg
Valve / Product Type: Flow rate control, Solenoid
Body Material: Nylon
Voltage: 110vAC, 110vDC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC, 6vDC
Port Size: 2 thread
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: NBR
Approvals: ATEX Zone II GD, ATEX Exm, IP65
Media: Water
Options required: Anti Water Hammer, Flow Control, Manual Override
Orifice: 55mm