1/8-1/2 Stainless solenoid valve 1-100 Bar 2/2 N/Closed
£204.74
£252.55 incl. VATDescription
100 Bar stainless solenoid valve CS Fluid Power SAPS
Function: 2/2 way Normally Closed
Operation: Pressure assisted (Min 1 Bar pressure differential)
Port: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread
Body: 316 stainless steel
Internals: stainless steel
Pressure: 1 to 100 Bar
Orifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)
Kv flow factor: 9.1 litres a minute based on water with a 1 Bar pressure difference.
Sealing: PTFE + NBR, option PTFE with EPDM, FKM, Silicone, VST, Neoprene, ECO, HNBR or Hypalon. Elastomer only sealing (without PTFE main seal) limited to 40 Bar Max.
Shading ring: Copper standard, optional for aggressive media silver shading ring for AC + DC coil or without shading ring for DC coil only.
Media: air, water, oil, carbon dioxide and most other slightly corrosive gases or fluids under 50CST compatible with materials of construction.
Coil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.
Protection: IP65 with LED connector (Included)
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.
Ideally suited for low temperature media down to -60C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.
All SAPS solenoid valves are 100% pressure and leak tested.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: SAPS
Width: 19.00 mm
Height: 88.00 mm
Depth: 41.00 mm
Weight: 0.66 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Seals: ECO, EPDM, HNBR, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST
Approvals: ATEX Zone II GD, ATEX Exm, IP54, IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Water
Options required: Mounting Holes
Pressure Maximum: 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar
Port Size: 1/8 thread, 1/4 thread, 3/8 thread, 1/2 thread
Orifice: 5.0mm, 6.0mm
Reviews
★★★★★5.0 / 5 2 reviews
Benjamin
★★★★★Responsive seller... pleased would do business with them again.Thanks!
Reviewed on 23/05/2020
Kenan vural
★★★★★Harika ürün (Which in English means great product), so thank you.
Reviewed on 24/08/2023