Electrical Connector 2P+E Form A with LED PG9 24v 110v 230v Nass Magnet (611-201) IP65

Description

EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED for solenoid valves

Connection: DIN ISO4400 Form A DIN 43650A 28mm square
Voltage: 24, 48, 120 or 230 volt
Current: 1 Amp maximum
Design: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover
Circuit: RED LED bipolar circuit protection, option Yellow or Green LED.
Drop off delay Max 3mSec
Power consumption: 5mAmp Maximum
Resistance 4 mOhm maximum.
Conduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed
Seals: NBR LABS-free 6 Grommet, gasket and cover gasket, max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. Resistance 4 mOhm Max.
Position: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),
Central fixing screw: steel 4.8 zinc plated
Contacts: CuZn, Sn/Cu plated
Temperature: -25°C to +125°C
Circuit 01

2022 PCB adjusted to the new terminal block, LED will be SMD, part numbers
24v 611-201-0147
110v 611-442-0504
230v 611-442-0505

In order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

Technical Specification