1/8 Brass solenoid valve 0-42 Bar 2/2 Latching 12vDC or 24vDC (LAD6000) 1.2-5mm
£64.02
£87.32 incl. VATDescription
1/8 inch Brass latching / bi-stable solenoid valve CS Fluid Power LAD6000.
Function: 2/2 way latching bistable
Operation: direct acting
Body: Brass
Internals: Stainless steel
Shading ring: without
Port: 1/8 BSP, option NPT thread.
Orifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm
Kv flow factor: 1.0 to 9.2 L/min according to orifice.
Pressure: full vacuum to 42 Bar (depending on coil power and orifice size)
Seals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.
Media: air, water, light oil, vacuum 10-6 Torr and most fluids under 50CST and gases compatible with materials of construction.
Coil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved.
Coil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved.
Protection: IP65 with LED connector (included)
Voltages: 12vDC or 24vDC
LAD6000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: LAD6000
Width: 19.00 mm
Height: 85.00 mm
Depth: 41.00 mm
Weight: 0.51 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 12vDC, 24vDC
Port Size: 1/8 thread
Function: 2/2 Latching
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST
Approvals: IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (Low), Vacuum (Medium), Water
Options required: Degreased, Mounting Holes
Orifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm