1/4 Stainless steel solenoid valve 0-42 Bar 2/2 Latching 12/24vDC (LADS8000) 1.2-5mm

£128.69

£158.74 incl. VAT
£107.24 ex. VAT

Brand: CS Fluid Power

Model: LADS8000

Stock: 17 in stock

Read Full Description

Description

1/4 inch stainless latching solenoid valve CS Fluid Power LADS8000.
Function: 2/2 way latching bistable
Operation: direct acting
Body: 316 stainless steel
Internals: Stainless steel
Shading ring: without
Port: 1/4 BSP, option NPT thread.
Orifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm
Kv flow factor: 1.0 to 9.2 Min according to orifice, based on water with 1 Bar pressure difference.
Pressure: vacuum 10-6 Torr to 42 Bar (depending on coil power and orifice size)
Seals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.
Media: air, water, light oil, vacuum 10-6 Torr and most slighty aggressive fluids under 50CST and gases compatible with materials of construction.
Coil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Coil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Protection: IP65 with LED connector (included)
Voltages: 12vDC or 24vDC

LADS8000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

Technical Specification

Brand: CS Fluid Power

Model: LADS8000

Width: 19.00 mm

Height: 85.00 mm

Depth: 41.00 mm

Weight: 0.51 kg

Valve / Product Type: Solenoid

Body Material: Stainless Steel

Voltage: 12vDC, 24vDC

Port Size: 1/4 thread

Function: 2/2 Latching

Operation: Direct Acting

Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar

Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST

Approvals: IP65, IP67, CSA, UL

Media: Air, Fluid (Slight Acid/Alkali), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Steam, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)

Options required: Degreased, Manifold, Manual Override, Mounting Holes, Shading Ring - without

Orifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm