1/8, 1/4, 3/8, 1/2, stainless steel solenoid valve 0-3.5 Bar 2/2 Latching 12vDC or 24vDC (LADS6,8,10,12) 3-8mm
£99.47
£122.68 incl. VATDescription
1/8 1/4 3/8 1/2 Stainless latching solenoid valve CS Fluid Power LADS612.
Function: 2/2 way latching / bi stable
Operation: direct acting
Body: 316 Stainless steel
Internals: Stainless steel
Shading ring: without
Port: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread.
Orifice: 3.0mm, 4.0mm, 5.0mm, 6.0mm or 8.0mm (according to port size)
Pressure: vacuum 10-6 Torr to 3.5 Bar (depending on coil power and orifice)
NBR standard, option FKM, VST, EPDM, Silicone, Neoprene, Hypalon, ECO and HNBR.
Media: air, water, light oil, vacuum and most fluids under 50 CST and gases compatible with materials of construction.
Coil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Coil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Protection: IP65 with LED connector (included)
Voltages: 12vDC or 24vDC
LADS6, LADS8, LADS10, LADS12 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: LADS612
Width: 19.00 mm
Height: 89.00 mm
Depth: 41.00 mm
Weight: 0.47 kg
Valve / Product Type: Solenoid
Body Material: Stainless Steel
Voltage: 12vDC, 24vDC
Port Size: 1/2 thread, 1/4 thread, 1/8 thread, 3/8 thread
Function: 2/2 Latching
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, FKM (Viton), VST
Approvals: IP65, IP67, CSA, UL
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Steam, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)
Options required: Degreased, Manifold, Manual Override, Mounting Holes, Shading Ring - without
Orifice: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm