1/2 BSP Gas solenoid valve EN161 200mBar Normally Closed
£68.50
£179.03 incl. VATDescription
1/2 inch Gas Solenoid Valve Elektrogas VMR12
Function: 2/2 way normally closed
Operation: direct acting
Port: 1/2 BSP, Option NPT thread (N)
Pressure: 0 to 200 millibar, options 500 millibar or 6 Bar
Media: Air and Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)
Certified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357
Kvs flow factor: 4.8 m3/hr, equipped with flow rate adjustment
Body: Aluminium
Seals: NBR based rubber certified for gas (EN549)
Open/close time: <1 second
Temperature: -15°C to +60°C
Mesh filter: 600 µm protects valve seat, disc and downstream components
Gauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.
Voltage: 230vAC standard, options for 12vDC, 24vDC, 24vAC and 110vAC are special order.
Coil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.
Electrical safety: Class I (EN 60335-1)
Coil: Insulation Class H 200°C, thermal resistance Class F 155°C
Voltage tolerance: -15% to +10%
Coil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X
Other options: (P) POC proof of closure available upon request.
Valves are 100% tested by computerised testing and are fully warranted.
All components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance.
The VMR12 is an auto reset gas solenoid valve fast opening single-stage suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.
Technical Specification
Brand: Elektrogas
Model: VMR12
Width: 46.00 mm
Height: 164.00 mm
Depth: 96.00 mm
Weight: 1.50 kg
Valve / Product Type: Flow rate control, Solenoid
Body Material: Aluminium
Voltage: 110vAC, 110vDC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 1/2 thread
Function: 2/2 Normally Closed
Operation: Assisted Lift
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar
Seals: NBR, FKM (Viton)
Approvals: ATEX Zone II GD, IP54, IP65, EAC, EN161, FM, SIL3
Media: Air, Gases (Non Aggressive), Gases (Slight Acid/Alakli), Natural Gas
Options required: Flow Control
Orifice: 12mm
Reviews
★★★★★5.0 / 5 1 reviews
Recep
★★★★★Item arrived quickly Well packed and undamaged. Small issue with quantity but this was resolved without question following a brief email outlining the problem. Thank you for this immediate resolution.  Would buy from again  Recommended seller., first class customer service and satisfaction.
Reviewed on 13/01/2023