Electrical Connector 2P+E Form A with LED PG6 230v Nass Magnet (6310013) IP65

Description

230v EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED for solenoid valves

Connection: DIN ISO4400 Form A DIN 43650A 28mm square
Voltage: 230 volt
Current: 1 Amp maximum
Design: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover
Circuit: RED LED bipolar circuit protection.
Drop off delay Max 3mSec
Power consumption: 5mAmp Maximum
Resistance 4 mOhm maximum.
Conduit entry: PG6 (cable 4 to 6mm)
Seals: NBR LABS-free 6 (Grommet, gasket and cover gasket), max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. Resistance 4 mOhm Max.
Position: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),
Central fixing screw: steel 4.8 zinc plated
Contacts: CuZn, Sn/Cu plated
Temperature: -25°C to +125°C
Circuit 01

Technical Specification