Elektrogas VMR EN161 Gas Solenoid Valve
Connexion Developments Ltd are UK stockists for Elektrogas solenoid valves. You can buy Elektrogas VMR, VMH auto reset and EVRMNC manual reset gas safety slam shut off valves.
The Elektrogas VMR series is an auto reset fast opening failsafe closed (power to open / power off will auto close) series gas safety shut off valve certified EN161 Class A for use with air and non-aggressive gases included in the 1, 2 and 3 families (EN437) natural gas and propane with special versions available with additional protection and epoxy coatings for aggressive gases such as coke oven gas (COG) and Biogas that contain traces of Hydrogen Sulphide.
VMR gas solenoid valves are suitable for most gas powered burners, gas boilers, industrial kilns and other gas appliances.
Key Features:
Pressure: 0 to 200 Millibar, Option 500 millibar or 6 Bar
Media: Air and Natural Gas, Option J Biogas, K Coke oven gas (COG)
Certified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357
Seals: NBR based rubber EN549 certified for gas
Open/close time: <1 second
Coil: 100% duty rated, IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland, Option IP65, Low power coil L, ATEX Ex-proof Zones 2 and 22 according to 94/9/EC Directive, Category II 3 G,D protection Ex n A II T4 X, Ex tD A 22 IP54 T135.
Electrical safety: Class I (EN 60335-1)
Equipped with flow rate adjustment (except brass models)
Fine filter mesh to protect seat and seal (except brass models)
1/4 BSP gauge ports on both sides on inlet chamber (except brass models) for manometers, pressure gauges and switches. Flanged models have two additional ports on the outlet chamber.
Other options: (P) POC proof of closure or CPI Closed Position Indication and other voltages 12vAC/DC, 24vAC/DC and 110vAC available upon request.